Gates Radiator Coolant Hose P/N:23831
Gates 51911 upper radiator coolant hose for the 2012-2016 Audi Q7 V6 3.0L carries coolant between the engine and the radiator. This Gates molded coolant hose is a modular assembly with its connector parts already in place.
A swollen or cracked cover, coolant residue at the quick connector or a dropping coolant level can mean the hose is wearing out; look only with the engine off and cool. A leaking radiator, a loose clamp or a tired water pump can also lead to coolant loss, so find the source before buying a hose. The engine takes one hose in the upper position.
This hose is a direct-fit replacement for the 2012-2016 Audi Q7 V6 3.0L.
Fit and size
Build and materials
Interchange: F11331 · R25697 · 4L0121101 · 7L8121101B
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is Gates 51911 the right upper hose for a 2012-2016 Audi Q7 V6 3.0L?
Yes. Gates 51911 is an upper radiator coolant hose listed for the 2012-2016 Audi Q7 V6 3.0L, and the engine takes one.
What are the inside diameters of the Gates 51911 coolant hose?
End 1 measures 32 mm (1.25 in) and end 2 measures 38 mm (1.49 in) inside diameter. Centerline length is 810 mm (31.89 in).
What temperature range can this coolant hose handle?
It is rated for -40°F to +257°F (-40°C to +125°C). The tube and cover are EPDM.
Should I replace the clamps when I install this hose?
Yes. Replace the clamps each time a new coolant hose goes on.
Can this hose be used for fuel or oil lines?
No. It is a coolant hose and is not for fuel or oil transfer applications.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.