Gates 90K-38104A serpentine belt drive component kit for the 2002-2003 Chevrolet Malibu V6 3.1L and other vehicles replaces the belt, tensioner and idler pulleys of the accessory belt drive in one kit. The kit meets or exceeds OE standards in form, function and fit.
- Serpentine belt with EPDM construction
- Belt measures 2208 mm (86.926 in) around the outside and 20 mm (0.807 in) across the top
- Tensioner and two idler pulleys come with the belt, so the wearing parts are serviced together
- Replacing the tensioner and pulleys with the belt helps avoid shortening the life of the belt and other front-end accessory components
Quick facts
- Part: Gates 90K-38104A serpentine belt drive component kit
- Fits: the 2002-2003 Chevrolet Malibu V6 3.1L and other vehicles
A belt that is cracked, frayed or glazed, or a squeal from the front of the engine, can mean the belt, tensioner or an idler pulley is worn. A seizing alternator, water pump or A/C compressor can be behind similar noise too, so find the cause before buying. Look at the belt only with the engine off and cool.
Fits
Other fits include the 2002-2005 Chevrolet Venture V6 3.4L and the 2002-2005 Buick Rendezvous V6 3.4L; a car takes a single kit. Driving something else? Look your car up in the "Vehicles it fits" section to see whether it is covered.
Specifications
Fit and size
- Belt outside circumference: 2208 mm (86.926 in)
- Belt top width: 20 mm (0.807 in)
- Idler pulleys: 2
- Quantity per vehicle: 1 kit
Build and materials
- Belt construction: EPDM
- Belt part number: K060864
- Tensioner assembly part number: 38104
- Idler pulley part number: 36347
- Country of origin: Mexico
In the box
One serpentine belt, one tensioner and two idler pulleys, plus the tensioner hardware the application calls for.
Installation notes
- Installation instructions and tech tips come with the kit.
Interchange: 5060865K3
Frequently Asked Questions
Does the Gates 90K-38104A kit fit the 2002-2005 Chevrolet Venture V6 3.4L?
Yes. Gates 90K-38104A fits the 2002-2005 Chevrolet Venture V6 3.4L, and one kit goes on the car. For any other car, look it up in the "Vehicles it fits" section.
Is this Gates drive belt kit sold with the belt, tensioner and idler pulleys?
Yes. Gates 90K-38104A holds one serpentine belt, one tensioner and two idler pulleys, plus tensioner hardware where the application needs it.
What size is the belt in this serpentine belt kit?
The belt is 2208 mm (86.926 in) around the outside and 20 mm (0.807 in) wide across the top. The belt construction is EPDM.
How can I tell the serpentine belt on my engine is worn?
Cracks, fraying, a glazed surface or a squeal from the front of the engine can mean the belt, tensioner or an idler pulley is worn. Inspect the belt only with the engine off and cool.
Does Gates 90K-38104A replace 5060865K3?
Yes. 5060865K3 is listed as an interchange number for Gates 90K-38104A.
