Gates 90K-38162A serpentine belt drive component kit for the 1998-2001 Ford Escort 4-cylinder 2.0L replaces the wearing parts of the accessory belt drive together. It holds a belt, a tensioner and two idler pulleys, so the whole drive is serviced in one job.
- Belt with EPDM construction
- Belt measures 2175 mm (85.63 in) around the outside and 20 mm (0.807 in) wide
- Tensioner and idler pulleys replaced with the belt, since old ones can shorten belt and accessory life
Quick facts
- Part: Gates 90K-38162A serpentine belt drive component kit
- Fits: 1998-2001 Ford Escort 4-cylinder 2.0L
- Condition: New
A squealing belt, cracks or glazing on the belt ribs, a belt that slips, or a rattling or wobbling tensioner or idler pulley can mean the belt drive is worn. A seized alternator, power steering pump or A/C compressor can cause similar noises and belt wear, so find which part is behind the symptom before you buy a kit.
Fits
This kit fits the 1998-2001 Ford Escort 4-cylinder 2.0L, and its parts meet or exceed OE standards in form, function and fit.
Specifications
Fit and size
- Quantity per vehicle: 1
- Belt outside circumference: 2175 mm (85.63 in)
- Belt top width: 20 mm (0.807 in)
Build and materials
- Belt construction: EPDM
- Belt part number: K060851A
- Tensioner part number: 38162
- Idler pulley part numbers: 38006, 38008
- Condition: New
- Country of origin: Mexico
In the box
One belt, one tensioner and two idler pulleys. This listing is one kit; the 1998-2001 Ford Escort 4-cylinder 2.0L takes one.
Installation notes
- Installation instructions come in the kit.
- Tech tips are included for accurate installation.
Interchange: DBKA060851
Frequently Asked Questions
Does the Gates serpentine belt drive component kit 90K-38162A fit a 1998-2001 Ford Escort 4-cylinder 2.0L?
Yes. Gates 90K-38162A is listed for the 1998-2001 Ford Escort 4-cylinder 2.0L. This listing is one kit, and that engine takes one.
Does this Gates drive belt kit include the belt, tensioner and idler pulleys?
Yes. The kit contains one belt, one tensioner and two idler pulleys.
What size is the belt in this serpentine belt kit?
The EPDM belt measures 2175 mm (85.63 in) around the outside and is 20 mm (0.807 in) wide.
How can I tell if the tensioner or idler pulleys on my belt drive are wearing out?
With the engine off and cool, look for a cracked or glazed belt and for play in a pulley. Squealing or rattling while driving can also come from worn drive parts.
Does the Gates 90K-38162A kit come with installation instructions?
Yes. Gates 90K-38162A comes with installation instructions and tech tips for accurate installation.
