Gates Serpentine Belt Drive Component Kit P/N:90K-38274C
Gates 90K-38178A serpentine belt drive component kit for the 2004-2006 Chevrolet Colorado 4-cylinder 2.8L or 5-cylinder 3.5L, the 2007-2012 Colorado 4-cylinder 2.9L or 5-cylinder 3.7L and other vehicles replaces the accessory drive belt along with its tensioner and idler pulley. Fitting this Gates serpentine belt drive component kit as a set lets you service the whole accessory belt drive in one job.
A worn serpentine belt can show cracks, fraying or glazed ribs, or squeal in normal driving. These signs alone do not prove the belt is the problem, since a noisy accessory pulley bearing can sound much the same. The kit meets or exceeds OE standards in form, function and fit.
The 2004-2006 GMC Canyon 4-cylinder 2.8L or 5-cylinder 3.5L, the 2007-2012 Canyon 4-cylinder 2.9L or 5-cylinder 3.7L, the 2006 Hummer H3 5-cylinder 3.5L and the 2007-2010 H3 5-cylinder 3.7L also take this kit, along with more vehicles. Open the "Vehicles it fits" section to check your exact model and engine. Each engine takes one kit.
Fit and size
Build and materials
One serpentine belt, one tensioner, the applicable idler pulley and applicable tensioner hardware. Kit contents vary with the needs of the vehicle application.
Interchange: K49280B · A060915K1 · BK4240 · DBK060916A
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Gates 90K-38178A kit right for the 2004-2006 Chevrolet Colorado 4-cylinder 2.8L or 5-cylinder 3.5L?
Yes. Gates 90K-38178A fits the 2004-2006 Chevrolet Colorado 4-cylinder 2.8L or 5-cylinder 3.5L and the 2007-2012 Colorado 4-cylinder 2.9L or 5-cylinder 3.7L. Open the "Vehicles it fits" section for other models.
Does this Gates drive belt kit include a tensioner and idler pulley?
Yes. Gates 90K-38178A includes a serpentine belt, tensioner, the applicable idler pulley and applicable tensioner hardware, with instructions. Contents vary with the vehicle application.
What size is the belt in this serpentine belt kit?
The belt in this kit measures 2340 mm (92.13 in) around its outside and 20 mm (0.807 in) across the top.
How can I tell the serpentine belt in this kit is worn?
Cracks, fraying or glazed ribs seen on a cool, stopped engine, or squealing in normal driving, can mean the belt is worn. A shop can also test the tensioner.
Does Gates 90K-38178A replace belt kit number BK4240?
Yes. BK4240 is one of the numbers this kit replaces, along with K49280B, A060915K1 and DBK060916A.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.