Gates 90K-38308 serpentine belt drive component kit for the 2003-2008 Mazda 6 V6 3.0L replaces the accessory drive belt together with its tensioner and idler pulley. Servicing the whole drive at once helps avoid repeat repairs.
- Serpentine belt with EPDM construction
- Tensioner included with the belt
- Idler pulleys included where the application needs them
- Tensioner hardware included where the application needs it
Quick facts
- Part: Gates 90K-38308 serpentine belt drive component kit
- Fits: 2003-2008 Mazda 6 V6 3.0L
- Position: Accessory drive
- Condition: New
A squeal or chirp, or a belt that looks cracked or glazed, can mean the belt, tensioner or idler pulley is worn, though a failing alternator bearing or A/C compressor clutch can make similar noise, so find the cause first. Leaving the old tensioner and pulley in place can shorten the life of a new belt and of other front-end accessory components.
Fits
This Gates serpentine belt drive component kit is a direct-fit replacement for the 2003-2008 Mazda 6 V6 3.0L and meets or exceeds OE standards in form, function and fit.
Specifications
Fit and size
- Position: Accessory drive
- Quantity per vehicle: 1
- Belt outside circumference: 2112 mm (83.155 in)
- Belt top width: 20 mm (0.807 in)
Build and materials
- Belt construction: EPDM
- Kit contents: belt, tensioner, idler
- Component numbers: belt K060825, tensioner assembly 38308, idler pulley 36239
- Condition: New
- Country of origin: Canada
In the box
One serpentine belt, one tensioner, idler pulleys and tensioner hardware as the application needs them. Kit contents vary with the vehicle application. This listing is one kit, and the 2003-2008 Mazda 6 V6 3.0L takes one.
Installation notes
- Installation instructions and tech tips come in the kit.
Interchange: DBK060825C
Frequently Asked Questions
Does the Gates 90K-38308 kit fit the 2003-2008 Mazda 6 V6 3.0L?
Yes. Gates 90K-38308 is listed for the 2003-2008 Mazda 6 V6 3.0L, and that engine takes one kit.
Does this Gates drive belt kit include a tensioner and idler pulley?
Yes. The kit has a belt, a tensioner and idler pulleys where the application needs them, plus tensioner hardware. Contents vary by vehicle application.
What size belt is in the Gates 90K-38308 kit?
The Gates 90K-38308 belt is 2112 mm (83.155 in) around the outside and 20 mm (0.807 in) wide at the top, in EPDM construction.
How can I tell the belt, tensioner or pulley in this kit is worn?
A squeal or chirp while driving, or a belt with visible cracks or glazing, can mean part of the drive is worn. A shop can test the tensioner and pulleys.
Does the Gates 90K-38308 kit come with installation instructions?
Yes. Gates includes installation instructions and tech tips with the kit, written for accurate installation.
