Gates 90K-38328A serpentine belt drive component kit for the 2014-2017 Chevrolet SS V8 6.2L and other vehicles restores the accessory belt drive in one service.
- Serpentine belt, tensioner and two idler pulleys in one kit
- Belt made with EPDM construction
- Belt is 1854 mm (73 in) around the outside and 20 mm (0.807 in) wide across the top
- Tensioner and pulleys are serviced with the belt, since worn ones can shorten belt life
Quick facts
- Part: Gates 90K-38328A serpentine belt drive component kit
- Fits: 2014-2017 Chevrolet SS V8 6.2L and other vehicles
- Condition: New
A squeal or chirp, a cracked, frayed or glazed belt, or a wobbling pulley can mean the belt drive is worn. With the engine off and cool, look the belt over and check the pulleys for play. A noisy belt can have other causes, so find the cause before replacing parts.
Fits
It fits the 2014-2017 Chevrolet SS V8 6.2L and the 2014-2016 Chevrolet Caprice V8 6.0L, and each takes one kit. The belt, tensioner and idler pulleys are OE-equivalent, and the kit meets or exceeds OE standards in form, function and fit.
Specifications
Fit and size
- Outside circumference: 1854 mm (73 in)
- Belt top width: 20 mm (0.807 in)
- Quantity per vehicle: 1 kit
Build and materials
- Contents: belt, tensioner, 2 idler pulleys
- Belt construction: EPDM
- Belt part number: K060724
- Tensioner part number: 38328
- Idler pulley part numbers: 36771, 38041
- Condition: New
- Country of origin: Canada
In the box
One serpentine belt, one tensioner, two idler pulleys and applicable tensioner hardware. Kit contents vary with the vehicle application.
Installation notes
- Installation instructions and tech tips come with the kit for accurate installation.
Interchange: DBK060724
Frequently Asked Questions
Does the Gates drive belt kit fit the 2014-2016 Chevrolet Caprice V8 6.0L?
Yes. Gates 90K-38328A fits the 2014-2016 Chevrolet Caprice V8 6.0L, and that car takes one kit.
What does this Gates serpentine belt drive component kit include?
Gates 90K-38328A has one serpentine belt, one tensioner and two idler pulleys, plus tensioner hardware where the application needs it and installation instructions.
How long and wide is the belt in this kit?
The EPDM belt measures 1854 mm (73 in) around the outside and 20 mm (0.807 in) across the top width.
How can I tell if the idler pulleys are worn?
With the engine off and cool, turn each pulley by hand. Roughness, a gritty feel or side-to-side play can mean a worn bearing.
Does Gates 90K-38328A replace DBK060724?
Yes. DBK060724 is listed as an interchange number for Gates 90K-38328A.
