Gates 90K-38385A serpentine belt drive component kit for the 1997-2006 Ford Ranger V6 3.0L and other vehicles restores the accessory belt drive in a single kit.
- Serpentine belt with EPDM construction
- Belt, tensioner and idler pulley supplied together in one kit
- Applicable tensioner hardware included with the tensioner
- Servicing the tensioner and idler pulley with the belt helps avoid shortening the life of the belt and front-end accessory components
Quick facts
- Part: Gates 90K-38385A serpentine belt drive component kit
- Fits: the 1997-2006 Ford Ranger V6 3.0L and other vehicles
- Condition: New
A squeal at start-up, cracks or fraying on the belt, or a rough-turning idler pulley can mean the belt drive needs service. A weak alternator, power steering pump, A/C compressor or water pump bearing can make similar noise or slipping, so find the cause before buying. Each engine takes one kit.
Fits
It fits the 1997-2006 Ford Ranger V6 3.0L, the 1997-2006 Mazda B3000 V6 3.0L and the 1997-2001 Ford F-100 Ranger V6 3.0L. The kit meets or exceeds OE standards in form, function and fit.
Specifications
Fit and size
- Quantity per vehicle: 1
- Belt outside circumference: 2257 mm (88.87 in)
- Belt top width: 20 mm (0.807 in)
Build and materials
- Contents: belt, tensioner, idler pulley
- Belt construction: EPDM
- Component part numbers: belt K060882, tensioner assembly 38385, idler pulley 38001
- Condition: New
- Country of origin: Mexico
In the box
One serpentine belt, one tensioner and one idler pulley, plus applicable tensioner hardware and installation instructions. Kit contents vary with the vehicle application.
Installation notes
- Installation instructions and tech tips come in the kit for an easy, accurate installation.
Interchange: 5060883K2 · DBK060882H
This part cross-references / interchanges with the following part numbers:
5060883K2, DBK060882H, 90K-38385A
Frequently Asked Questions
Is this Gates serpentine belt drive component kit right for the 1997-2006 Mazda B3000 V6 3.0L?
Yes. Gates 90K-38385A fits the 1997-2006 Mazda B3000 V6 3.0L, and that engine takes one kit.
Does the Gates drive belt kit include a tensioner and idler pulley?
Yes. The kit has a serpentine belt, a tensioner and an idler pulley, plus applicable tensioner hardware and instructions. Contents vary with the application.
What size is the belt in the Gates 90K-38385A kit?
The EPDM serpentine belt in Gates 90K-38385A measures 2257 mm (88.87 in) around the outside and 20 mm (0.807 in) across the top.
How can I tell if my idler pulley or belt is wearing out?
With the engine off and cool, look for cracks or fraying on the belt and check whether the idler pulley turns roughly or has play. A squeal while driving can also mean wear.
Will 5060883K2 cross to this kit?
Yes. 5060883K2 is listed as an interchange number for Gates 90K-38385A, along with DBK060882H.
