Gates 90K-38410A serpentine belt drive component kit for the 2007-2011 Toyota Camry V6 3.5L and other vehicles is intended to restore the accessory belt drive with a new belt, tensioner and idler pulleys in one kit.
- Serpentine belt with EPDM construction
- Tensioner and two idler pulleys supplied in the same kit as the belt
- Applicable tensioner hardware supplied with the kit
- Belt measures 2102 mm around the outside and 24 mm across the top
Quick facts
- Part: Gates 90K-38410A serpentine belt drive component kit
- Fits: 2007-2011 Toyota Camry V6 3.5L and other vehicles
- Condition: New
Cracks or fraying on the belt, a glazed belt surface or a squeal from the front of the engine can mean the belt, tensioner or idler pulleys are worn, though a noisy accessory bearing such as the alternator or a power steering pump can make similar sounds.
Fits
Vehicles covered include the 2007-2011 Toyota Camry V6 3.5L, the 2007-2010 Toyota Sienna V6 3.5L and the 2005-2012 Toyota Avalon V6 3.5L, each of which takes a single kit, and this listing is one kit. The belt, tensioner and idler pulleys are OE-equivalent, and the kit meets or exceeds OE standards in form, function and fit.
Specifications
Fit and size
- Quantity per vehicle: 1
- Belt outside circumference: 82.75 in (2102 mm)
- Belt top width: 24 mm (0.947 in)
- Kit contents: belt, tensioner, 2 idler pulleys
Build and materials
- Belt construction: EPDM
- Component numbers: belt K070822, tensioner 38410, idler pulley 36173 (two)
- Condition: New
- Country of origin: Mexico
In the box
One serpentine belt, one tensioner, two idler pulleys and applicable tensioner hardware. Contents vary with the needs of the vehicle application.
Installation notes
- Installation instructions and tech tips come with the kit for the steps.
- Replace the tensioner and idler pulleys at the same time as the belt, since leaving them can shorten the new belt's life.
Interchange: ACK070822 · B40110 · ADK0003P · K49424A · BK4256 · LV999225B · DBK070822
This part cross-references / interchanges with the following part numbers:
ACK070822, B40110, ADK0003P, K49424A, BK4256, LV999225B, DBK070822, 90K-38410A
Frequently Asked Questions
Is the Gates 90K-38410A kit right for the 2007-2010 Toyota Sienna V6 3.5L?
Yes, Gates 90K-38410A fits the 2007-2010 Toyota Sienna V6 3.5L. If your car is not named on this page, look it up in the "Vehicles it fits" section.
Does this Gates drive belt kit include the tensioner?
Yes. Besides the serpentine belt, the kit holds a tensioner and two idler pulleys, plus applicable tensioner hardware and installation instructions.
What size is the belt in the Gates 90K-38410A kit?
The Gates 90K-38410A belt is 2102 mm (82.75 in) around the outside and 24 mm (0.947 in) wide across the top, with EPDM construction.
How can I tell the belt in this kit's drive is worn?
With the engine off, cracks, fraying or a glazed belt surface can point to wear. A squeal or chirp from the front of the engine in normal driving can also be a sign.
What installation guidance comes with this belt kit?
Installation instructions and tech tips come in the kit, for accurate installation of the belt, tensioner and idler pulleys.
