Gates 90K-39096 serpentine belt drive component kit for the 2010-2011 Toyota Camry 4-cylinder 2.5L replaces the belt and tensioner together. The kit restores the entire accessory belt drive system, not only the belt.
- Belt, tensioner and any idler pulleys the application needs are replaced together, since worn ones can shorten belt life
- Serpentine belt with EPDM construction
- Belt drive for the alternator, water pump and air conditioning
- Belt 1254 mm (49.38 in) around the outside and 14 mm (.56 in) across the top
Quick facts
- Part: Gates 90K-39096 serpentine belt drive component kit
- Fits: 2010-2011 Toyota Camry 4-cylinder 2.5L
- Position: Alternator, water pump and air conditioning
- Condition: New
A belt squeal, cracked or frayed ribs, or noise from the tensioner or an idler pulley can mean the drive needs service. These signs alone do not prove the kit is the problem, since a failing accessory such as the alternator can make similar noises.
Fits
This kit fits the 2010-2011 Toyota Camry 4-cylinder 2.5L, and that car takes one kit. The kit is OE-equivalent and meets or exceeds OE standards in form, function and fit.
Specifications
Fit and size
- Position: alternator, water pump and air conditioning
- Quantity per vehicle: 1
- Belt outside circumference: 1254 mm (49.38 in)
- Belt top width: 14 mm (.56 in)
Build and materials
- Belt construction: EPDM
- Condition: new
- Gates belt part number: K040488A
- Gates tensioner assembly part number: 39096
- Country of origin: Canada
In the box
One serpentine belt and one tensioner, plus idler pulleys and tensioner hardware where the application needs them. Kit contents vary with the vehicle application.
Installation notes
- Installation instructions and tech tips come with the kit for easy, accurate installation.
Frequently Asked Questions
Does the Gates 90K-39096 serpentine belt drive component kit fit the 2010-2011 Toyota Camry 4-cylinder 2.5L?
Yes. Gates 90K-39096 is listed for the 2010-2011 Toyota Camry 4-cylinder 2.5L, and that car takes one kit.
What is in the Gates 90K-39096 drive belt kit?
The kit has a serpentine belt and a tensioner, plus idler pulleys and tensioner hardware where the application needs them. Contents vary with the vehicle application.
How long and wide is the serpentine belt in this kit?
The belt measures 1254 mm (49.38 in) around the outside and 14 mm (.56 in) across the top.
Which signs on a serpentine belt can mean it is worn?
Cracks, fraying or a glazed, shiny belt surface can mean wear. Look only with the engine off and cool; a shop can test the tensioner and pulleys.
Do installation instructions come with the Gates 90K-39096 kit?
Yes. Installation instructions and tech tips are included with the kit.
