Gates 90K-39106 serpentine belt drive component kit for the 2009-2018 Toyota RAV4 4-cylinder 2.5L and other vehicles restores the whole accessory belt drive system in one service. The kit meets or exceeds OE standards in form, function and fit.
- Serpentine belt with EPDM construction
- Belt outside circumference of 1270 mm (50 in) and top width of 20 mm (0.807 in)
- Belt and tensioner supplied together in one kit
- Put together for easy parts sourcing and fewer repeat repairs
Quick facts
- Part: Gates 90K-39106 serpentine belt drive component kit
- Fits: 2009-2018 Toyota RAV4 4-cylinder 2.5L and other vehicles
- Condition: New
A squeal, or a belt with cracks, fraying, missing ribs or shiny glazed edges, can mean the belt drive is worn. A look at the belt with the engine off is a sensible first check. Noise can also come from another accessory, so find the cause before you replace parts.
Fits
It fits the 2009-2018 Toyota RAV4 4-cylinder 2.5L, the 2012-2017 Toyota Camry 4-cylinder 2.5L and the 2011-2016 Scion tC 4-cylinder 2.5L, and each of them takes one kit.
Specifications
Fit and size
- Quantity per vehicle: 1
- Belt outside circumference: 1270 mm (50 in)
- Belt top width: 20 mm (0.807 in)
Build and materials
- Kit contents: belt, tensioner
- Belt construction: EPDM
- Belt part number: K060494
- Tensioner assembly part number: 39106
- Condition: New
- Country of origin: Canada
In the box
One serpentine belt and one tensioner.
Installation notes
- Installation instructions and tech tips come with the kit for accurate installation.
Interchange: B40368 · 5060495K1 · 5060650K1 · BK3103 · DBK060494
This part cross-references / interchanges with the following part numbers:
B40368, 5060495K1, 5060650K1, BK3103, DBK060494, 90K-39106
Frequently Asked Questions
Does the Gates 90K-39106 kit fit the 2009-2018 Toyota RAV4 4-cylinder 2.5L?
Yes. Gates 90K-39106 fits the 2009-2018 Toyota RAV4 4-cylinder 2.5L, and that vehicle takes one kit.
Is this Gates drive belt kit just a belt?
No. This kit contains one serpentine belt and one tensioner, and this listing is a single kit.
How wide is the belt in the Gates 90K-39106 kit?
The belt is 20 mm (0.807 in) wide at the top and 1270 mm (50 in) around the outside. Its Gates belt part number is K060494.
Why does this serpentine belt kit include a tensioner?
Leaving the tensioner and pulleys in place when the belt is replaced can shorten the life of the belt and other front accessory components. The kit supplies a belt and tensioner together.
Is BK3103 a cross-reference for Gates 90K-39106?
Yes. BK3103 is an interchange number for Gates 90K-39106, along with B40368, 5060495K1, 5060650K1 and DBK060494.
