Gates 90K-39273 serpentine belt drive component kit for the 2009-2012 Ford Escape V6 3.0L and other vehicles replaces the belt, tensioner and related hardware together. Replacing the belt without the tensioner and pulleys can shorten the life of the belt and other front-end accessory components.
- Serpentine belt with EPDM construction
- Belt, tensioner, applicable idler pulleys and tensioner hardware in one kit
- Two belts: outside circumferences of 508 mm and 1153 mm, top widths of 11 mm and 20 mm
Quick facts
- Part: Gates 90K-39273 serpentine belt drive component kit
- Fits: 2009-2012 Ford Escape V6 3.0L and other vehicles
- Material: EPDM belt construction
- Condition: New
A cracked, frayed or glazed belt can mean the drive is worn. Before replacing anything, look over the belt ribs, tensioner and pulleys for cracks, glazing, fraying or rust with the engine off and cool. A shop can test the drive while the engine runs.
Fits
It is a direct-fit replacement for the 2009-2012 Ford Escape V6 3.0L and the 2010-2012 Ford Fusion V6 3.0L, and each takes one kit. It meets or exceeds OE standards in form, function and fit.
Specifications
Fit and size
- Quantity per vehicle: 1
- Contents: 2 belts, tensioner
- Outside circumference: 508 mm (20 in) and 1153 mm (45.375 in)
- Belt top width: 11 mm (0.42 in) and 20 mm (0.807 in)
- Belt part numbers: K060448, K030196SF
Build and materials
- Belt construction: EPDM
- Tensioner assembly part number: 39273
- Condition: New
- Country of origin: Canada
In the box
Two belts and a tensioner. Idler pulleys and tensioner hardware are included where the application calls for them; kit contents vary by vehicle application.
Installation notes
- Installation instructions and tech tips come with the kit.
Interchange: ACK060448 · DBK060448A
This part cross-references / interchanges with the following part numbers:
ACK060448, DBK060448A, 90K-39273
Frequently Asked Questions
Will the Gates serpentine belt drive component kit fit a 2009-2012 Ford Escape V6 3.0L?
Yes. Gates 90K-39273 is a direct-fit replacement for the 2009-2012 Ford Escape V6 3.0L, and the 2010-2012 Ford Fusion V6 3.0L takes it too.
Do I get idler pulleys and hardware with this Gates serpentine kit?
Yes, where the application calls for them. The listed contents are two belts and a tensioner, and applicable idler pulleys and tensioner hardware are added as the vehicle kit requires.
Is the belt in this Gates drive belt kit made of EPDM?
Yes. The kit's serpentine belt has EPDM construction, and the kit includes two belts with outside circumferences of 508 mm and 1153 mm.
How can I spot a worn belt on a Gates 90K-39273 serpentine belt drive kit?
Cracks across the ribs and a glazed, shiny surface show on a look with the engine off and cool, and a squeal from the belt area may be heard while driving. Any of these can mean the belt is due for replacement.
Does the Gates 90K-39273 kit come with installation instructions?
Yes. The kit comes with installation instructions and tech tips for accurate installation of the belt and tensioner.
