Gates Serpentine Belt Drive Component Kit P/N:90K-38164
Gates 90K-39331 serpentine belt drive component kit for the 2013-2017 Honda Accord V6 3.5L and other vehicles replaces the belt and tensioner together to restore the accessory belt drive.
Squealing, chirping, or a cracked, glazed or frayed belt can mean the belt, tensioner or a pulley is worn. Before you replace the kit, rule out an oil or coolant leak onto the belt and a rough accessory bearing, since either would damage a new belt too.
Listed for a wide range of Honda and Acura models, the kit covers the 2013-2017 Honda Accord V6 3.5L, the 2014-2019 Acura RLX V6 3.5L and the 2015-2019 Acura TLX V6 3.5L. Each V6 3.5L engine takes a single kit. If your car is not one of these, enter its year and engine in the "Vehicles it fits" section to see whether it is covered. The kit meets or exceeds OE standards in form, function and fit.
Fit and size
Build and materials
One serpentine belt and one tensioner. Idler pulleys and tensioner hardware come only where the vehicle application calls for them, so kit contents vary by application.
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the Gates 90K-39331 kit fit the 2015-2019 Acura TLX V6 3.5L?
Yes, Gates 90K-39331 is listed for the 2015-2019 Acura TLX V6 3.5L; for other years and engines, look up your car in the "Vehicles it fits" section.
What parts come in this Gates serpentine belt drive component kit?
Gates 90K-39331 contains a serpentine belt and a tensioner. Idler pulleys and tensioner hardware are added only where the vehicle application needs them.
How wide and long is the belt in this Gates drive belt kit?
The belt is 20 mm (0.807 in) wide and 1186 mm (46.676 in) around the outside.
What can a squealing or cracked serpentine belt mean?
Squealing, chirping, or a cracked, glazed or frayed belt can mean the belt, tensioner or a pulley is worn. Any test that needs the engine running is best left to a shop.
Why does this belt kit include a tensioner?
Leaving an old tensioner or pulley in place when the belt is changed can shorten the life of the new belt and of other front-end accessory components.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.