Gates Serpentine Belt P/N:K081294
Gates K030395 serpentine belt for the 1991-1998 Nissan 240SX 4-cylinder 2.4L and other vehicles drives the power steering and fan from engine power. This Gates Micro-V serpentine belt, one of the Gates ribbed belts, meets or exceeds all original equipment manufacturer specifications.
Cracks in the ribs, a squeal at start-up or a belt that slips can mean this belt is worn, though a weak tensioner or a misaligned pulley can be behind them, so find the cause before replacing the belt.
This serpentine belt fits the 1991-1998 Nissan 240SX 4-cylinder 2.4L, the 1990-1992 Infiniti M30 V6 3.0L and the 1987-1989 Nissan 300ZX V6 3.0L. Each takes one belt.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
Does the Gates K030395 serpentine belt fit a 1991-1998 Nissan 240SX 4-cylinder 2.4L?
Yes. Gates K030395 fits the 1991-1998 Nissan 240SX 4-cylinder 2.4L, and that vehicle takes one belt.
Is this a serpentine belt for the 1987-1989 Nissan 300ZX V6 3.0L?
Yes. Gates K030395 is listed for the 1987-1989 Nissan 300ZX V6 3.0L, which takes one belt.
Are Gates drive belts like this one made of EPDM rubber?
Yes. This belt is made of EPDM with a polyester cord, and the EPDM construction resists cracking on the rib surface.
What size are Gates serpentine belts like the K030395?
Gates K030395 has a K cross section with 3 ribs, an 11 mm top width, a 1007 mm effective length and a 1019 mm outside circumference.
Should the tensioner be replaced along with this Micro-V belt?
Yes, when the vehicle is equipped with a tensioner, replacing it along with the belt is recommended.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.