Serpentine Belt for 2017-2018 Autocar LLC. Xpeditor & More - Gates K080926

$95.99

Vehicles this part fits

    Part number: K080926
    UPC: 072053604924
    Condition: New
    Weight: 0.60 LBS
    Item Package Quantity: 1
    $95.99
    Adding to cart… The item has been added

    Have questions?

    Gates Serpentine Belt P/N:K080926
    Gates Serpentine Belt P/N:K080926
    $95.99
    $95.99

    Gates K080926 serpentine belt for the 2017-2018 Autocar LLC. Xpeditor 6-cylinder 8.9L and other vehicles and equipment drives engine accessories. Among Gates serpentine belts, this Micro-V design is listed for fan, alternator, air conditioning and water pump drives.

    • Gates Micro-V serpentine belt with 8 ribs and a K cross section
    • EPDM rubber with a polyester cord; the rib surface resists cracking
    • Special belt construction designed to reduce belt noise and tension loss

    Quick facts

    • Part: Gates K080926 serpentine belt
    • Fits: 2017-2018 Autocar LLC. Xpeditor 6-cylinder 8.9L and other vehicles and equipment
    • Position: Accessory drive, fan, alternator, air conditioning, water pump, hub
    • Material: EPDM
    • Condition: New

    With the engine off and cool, cracked or missing rib sections, frayed edges and a glazed rib surface can mean a belt is worn. Before you replace the belt, rule out a binding tensioner or accessory pulley, since the noise or wear could start there. This listing is one belt, and the 2017-2018 Autocar LLC. Xpeditor 6-cylinder 8.9L takes one.

    Fits

    The belt is listed for a wide range of Autocar, Freightliner, International, Peterbilt and Sterling models and John Deere equipment, including the 2017 International 7300 6-cylinder 6.7L and the 2008-2010 Peterbilt 325 truck 6-cylinder 6.7L. It meets or exceeds all specifications from the original equipment manufacturer. For another model, find its year and engine in the "Vehicles it fits" section.

    Specifications

    Fit and size

    • Position: Accessory drive, fan, alternator, air conditioning, water pump, hub
    • Quantity per vehicle: 1
    • Rib quantity: 8
    • Cross section: K
    • Top width: 28 mm (1.087 in)
    • Outside circumference: 2367 mm (93.169 in)
    • Effective length: 2352 mm (92.6 in)

    Build and materials

    • Type: Automotive V-ribbed belt (standard)
    • Material: EPDM
    • Cord material: Polyester
    • Grade: OE Performance
    • Condition: New
    • Country of origin: Mexico

    Installation notes

    • Tensioner replacement is recommended when the engine has one.

    Product information is for general reference and may contain errors. See our Disclaimer.

    Frequently Asked Questions

    Does the Gates K080926 fit the 2017 International 7300 6-cylinder 6.7L?

    Yes. Gates K080926 is listed for the 2017 International 7300 6-cylinder 6.7L and for many other vehicles and equipment. Find your own year and engine in the "Vehicles it fits" section.

    Are Gates ribbed belts like this one made of EPDM rubber?

    Yes. The Gates K080926 has an EPDM rubber body with a polyester cord and 8 ribs, and the EPDM resists cracking on the rib surface.

    How can I tell if one of my Gates drive belts is worn?

    With the engine off and cool, look for cracks or missing pieces in the ribs, frayed edges or a shiny, glazed rib surface. A shop can check belt tension and pulley alignment.

    Does this Gates alternator belt also drive the water pump?

    Yes, water pump drive is among the positions listed for the Gates K080926, along with fan, alternator and air conditioning. The effective length is 2352 mm.

    Should the tensioner be replaced along with this serpentine belt?

    Yes, when the engine has one, since tensioner replacement is recommended with this belt. This listing is only the belt, not a tensioner.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review