Gates Serpentine Belt P/N:K081348HD
Gates K081348 serpentine belt for the 2012-2016 Ford F-250 Super Duty V8 6.7L and other vehicles turns the engine's belt-driven accessories from the crankshaft pulley. This Gates Micro-V serpentine belt matches the OE size, construction and materials and meets or exceeds all specifications from the original equipment manufacturer.
Cracked or frayed ribs, or a squeal in normal driving, can mean the belt is worn, though a pulley or tensioner can also make noise. With the engine off and cool, look over the rib surface for damage before you order. If a worn belt is the cause, this one replaces it.
The belt is listed for a wide range of Ford Super Duty trucks, led by the 2012-2016 Ford F-350 Super Duty V8 6.7L and the 2012-2016 Ford F-450 Super Duty V8 6.7L, and each truck takes one belt. If your truck is not named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
Interchange: 25-081348 · 25-081348HD
CC3Q 6C301 AA · CC3Z 8620 A · 8K1348 · K081348HD · 4081346 · 4081346X · 742116 · 8PK3424 · 1081348 · 8PK3421 · 8PK3422 · 8PK3423 · 8PK3425 · 8PK3426 · 8PK3427 · JK81353
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is Gates K081348 the Ford F-250 Super Duty serpentine belt for the 2012-2016 model with the V8 6.7L?
Yes. Gates K081348 is listed for the 2012-2016 Ford F-250 Super Duty V8 6.7L, and the 2012-2016 Ford F-350 Super Duty V8 6.7L takes it too. Other trucks are in the "Vehicles it fits" section.
Is K081348 one of the Gates ribbed belts, and how many ribs does it have?
Yes. Gates K081348 is a V-ribbed belt with 8 ribs and a K cross section, 28 mm wide across the top.
What is the belt material in Gates drive belts like this one?
This belt is EPDM rubber with a polyester cord. The EPDM resists cracking on the rib surface.
What should I look for on a worn serpentine belt like Gates K081348?
Cracks across the rib surface and fraying are visible signs of wear, and you can look for them with the engine off. A squeal in normal driving can also point to a worn belt.
Should I replace the tensioner when installing one of the Gates serpentine belts?
Yes, when the truck has a tensioner, replacing it along with the belt is recommended. This listing is the belt, so a tensioner is ordered separately.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.