Gates Serpentine Belt P/N:K081362HD
Gates K081362 serpentine belt for the 1999-2003 Ford E-350 Super Duty V8 7.3L, the 2004-2007 E-350 Super Duty V8 6.0L and other vehicles carries engine power to the accessory drive. Among Gates serpentine belts, this Micro-V belt matches the original equipment in size, construction and materials, and it meets or exceeds the original manufacturer's specifications.
A belt with cracks across the ribs, frayed edges or a squeal from the accessory drive may be worn. These signs alone do not prove the belt is the problem, since a weak tensioner or a misaligned pulley can make similar noise.
It also fits the 2000-2003 Starcraft Bus Starlite V8 7.3L, the 2004-2007 Starlite V8 6.0L and the 2004-2007 Ford E-450 Super Duty V8 6.0L. The 1999-2003 Ford E-350 Super Duty V8 7.3L takes one belt. If your vehicle is not named here, search your year, model and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
Interchange: JK8-1367 · 25-081362
1C2Z 8620 PA · 3C2Z 8620 BA · 3C2Z 8620 BB · F8UZ 8620 EA · JK8 1363 · JK8 1367 A · 8K1362 · 1363K8MK · 4081362 · 5081363 · 742017 · 8PK3459 · 1081362 · 8PK3457 · 8PK3458 · 8PK3460 · 8PK3461 · 8PK3462 · 8PK3463 · 8PK3455
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Gates K081362 serpentine belt fit the 1999-2003 Ford E-350 Super Duty V8 7.3L?
Yes. The Gates K081362 fits the 1999-2003 Ford E-350 Super Duty V8 7.3L and the 2004-2007 E-350 Super Duty V8 6.0L; for another vehicle, search your year, model and engine in the "Vehicles it fits" section.
What are the dimensions of this Gates Micro-V serpentine belt?
The Gates K081362 has 8 ribs, a K cross section, a 28 mm top width, a 3474 mm outside circumference and a 3460 mm effective length.
Is the K081362 a Gates heavy duty serpentine belt or a standard one?
This Gates K081362 is OE Performance grade, made of EPDM rubber with polyester cord, and the EPDM resists cracking on the rib surface.
What wear signs should I look for on Gates ribbed belts?
Cracks across the ribs, frayed edges or a squeal from the accessory drive can point to a worn belt. With the engine off and cool, you can look over the rib surface for cracks and fraying.
Should I replace the tensioner when installing one of these Gates drive belts?
Tensioner replacement is recommended if the vehicle is equipped with one, so plan for that part when you install this Gates K081362 belt.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.