Gates Serpentine Belt P/N:K100665HD
Gates K100665 serpentine belt for the 2006 Mack CT 6-cylinder 11.9L and other vehicles drives the fan and alternator. It meets or exceeds all Original Equipment Manufacturer specifications.
Cracks across the ribs, fraying or a squeal at startup can mean the belt is worn. A squeal alone does not prove the belt is at fault, since a weak tensioner is another common cause. Each truck takes one belt for the fan and alternator drive.
The 2006 Mack CT Series and the 2004-2005 Mack DM 6-cylinder 11.9L fit this belt as well, along with other Mack and Volvo models. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
Product information is for general reference and may contain errors. See our Disclaimer.
Does the Gates K100665 fit the 2006 Mack CT 6-cylinder 11.9L?
Yes. Gates K100665 serpentine belt fits the 2006 Mack CT 6-cylinder 11.9L, and each truck takes one belt.
Is the K100665 a Gates alternator belt?
Yes, its listed position is fan and alternator, fan. Open the "Vehicles it fits" section to check your exact model and engine.
How many ribs and how wide is this Gates ribbed belt?
Gates K100665 has 10 ribs and a K cross section, with a 35 mm (1.367 in) top width and a 1690 mm (66.53 in) effective length.
Is tensioner replacement recommended with Gates serpentine belts?
Yes. For Gates K100665, tensioner replacement is recommended if the vehicle is equipped with one.
Is the K100665 one of the Gates drive belts made from EPDM?
Yes. This belt is EPDM rubber with a polyester cord, and the EPDM resists cracking on the rib surface.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.