Gates Serpentine Belt P/N:K070825HD
Gates K100710HD serpentine belt for the 2017 IC Corporation RE Commercial 6-cylinder 7.6L and other vehicles drives the fan, water pump, alternator and air conditioning. This Gates ribbed belt is built for heavy-duty drives and has 10 ribs.
Cracks across the ribs, fraying, a squeal at start-up or a belt that slips can mean this serpentine belt is worn, though a tired tensioner or a pulley that is out of line can be behind the same signs. Replacing the tensioner is recommended when the engine has one. The drive takes a single belt.
The 2017 IC Corporation RE Commercial 6-cylinder 7.6L, the 2013-2017 IC Corporation RE School Bus 6-cylinder 7.6L and the 2016 IC Corporation CE School Bus 6-cylinder 7.6L all fit this belt, along with a wide range of other trucks and buses. Don't see your truck or bus here? Look for it in the "Vehicles it fits" section.
Fit and size
Build and materials
One serpentine belt.
Product information is for general reference and may contain errors. See our Disclaimer.
Does the Gates K100710HD fit the 2013-2017 IC Corporation RE School Bus 6-cylinder 7.6L?
Yes. The Gates K100710HD serpentine belt fits the 2013-2017 IC Corporation RE School Bus 6-cylinder 7.6L. For other trucks and buses, look in the "Vehicles it fits" section.
Is the Gates fleetrunner serpentine belt a 10-rib belt, and how long is it?
Yes. Gates K100710HD has 10 ribs and a K cross section. Its effective length is 1802 mm (70.93 in) and its outside circumference is 1816 mm (71.5 in).
What is the Gates micro v serpentine belt made of?
The Gates K100710HD is made of EPDM with a polyester cord and a distinct green overcord. The patented material is made to hold up at prolonged extreme operating temperatures.
How can I tell when Gates drive belts are worn on a heavy-duty engine?
With the engine off and cool, look at the ribs for cracks or fraying. In normal driving, a squeal or slipping belt is a sign to have it looked at. A shop can test the tensioner and pulleys.
Should I replace the tensioner along with the Gates FleetRunner Micro-V serpentine belt?
Tensioner replacement is recommended with the Gates K100710HD if the engine is equipped with one. This listing is the belt only, one serpentine belt.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.