Serpentine Belt for 2011-2015 International 4300 & More - Gates K100850

$80.99

Vehicles this part fits

    Part number: K100850
    UPC: 770075822196
    Condition: New
    Weight: 0.70 LBS
    Item Package Quantity: 1
    $80.99
    Adding to cart… The item has been added

    Have questions?

    Gates Serpentine Belt P/N:K100850
    Gates Serpentine Belt P/N:K100850
    $80.99
    $80.99

    Gates K100850 serpentine belt for the 2011-2015 International 4300 6-cylinder 7.6L and other vehicles drives the water pump, fan, alternator and air conditioning. It is one of the Gates ribbed belts and runs as a single belt across the accessory pulleys.

    • Gates Micro-V serpentine belt, a standard V-ribbed type with a K cross section
    • Special belt construction to reduce belt noise and tension loss on problem drive applications
    • EPDM rubber construction that resists cracking on the rib surface
    • Polyester cord in a belt with a 2160 mm effective length

    Quick facts

    • Part: Gates K100850 serpentine belt
    • Fits: 2011-2015 International 4300 6-cylinder 7.6L and other vehicles
    • Position: Accessory drive, water pump, fan, alternator and air conditioning
    • Material: EPDM
    • Condition: New

    A worn belt can show cracks across the ribs, fraying or a squeal at startup. Those signs alone do not prove the belt is the problem, since a worn tensioner can cause them too.

    Fits

    It fits the 2011-2015 International 4300 6-cylinder 7.6L, the 2011-2015 International 4300LP 6-cylinder 7.6L and the 2012 IC Corporation HC Integrated Commercial 6-cylinder 7.6L, and one belt covers each application. Its size, construction and materials match the OE belt.

    Specifications

    Fit and size

    • Position: Accessory drive, water pump, fan, alternator and air conditioning
    • Quantity per vehicle: 1
    • Rib quantity: 10
    • Cross section: K
    • Top width: 35 mm (1.367 in, 1 3/8 in)
    • Outside circumference: 2178 mm (85.76 in, 85 3/4 in)
    • Effective length: 2160 mm (85.03 in)

    Build and materials

    • Type: Automotive V-ribbed belt (standard)
    • Material: EPDM
    • Cord material: Polyester
    • Grade type: OE Performance
    • Condition: New
    • Country of origin: Mexico

    Installation notes

    • Tensioner replacement is recommended, if the vehicle is equipped with one.

    Interchange: 25-100850
    10K850 · 1888629C1 · 10PK2158 · 10PK2159 · 10PK2160 · 10PK2161 · 10PK2162 · 10PK2163

    Product information is for general reference and may contain errors. See our Disclaimer.

    This part cross-references / interchanges with the following part numbers:

    10K850, 1888629C1, 10PK2158, 10PK2159, 10PK2160, 10PK2161, 10PK2162, 10PK2163, K100850, 25-100850

    Frequently Asked Questions

    Does the Gates K100850 serpentine belt fit the 2011-2015 International 4300 6-cylinder 7.6L?

    Yes, Gates K100850 fits the 2011-2015 International 4300 6-cylinder 7.6L, and the application takes one belt.

    Are Gates serpentine belts like this one made of EPDM?

    Yes, this belt is EPDM rubber with a polyester cord. The EPDM construction resists cracking on the rib surface.

    What size is this 10-rib Gates belt?

    It has 10 ribs, a 35 mm (1 3/8 in) top width, a 2178 mm (85.76 in) outside circumference and a 2160 mm (85.03 in) effective length.

    Is this Gates alternator belt also the one that drives the water pump and A/C?

    Yes, Gates K100850 is listed for the accessory drive, which covers the water pump, fan, alternator and air conditioning.

    Should I replace the tensioner when fitting Gates drive belts like this one?

    Yes, if the vehicle has a tensioner, replacing it along with the belt is recommended.

    Reviews

    No reviews yet — be the first to review this product.

    Write a Review