Gates Serpentine Belt P/N:K081294HD
Gates K100983HD serpentine belt for the 2009-2011 International/Navistar Workstar 7500 truck and other vehicles runs the fan and alternator in the engine's accessory drive. This Gates FleetRunner Micro-V serpentine belt has a patented EPDM construction made for heavy-duty drives.
A worn serpentine belt can show cracks, fraying or a squeal from the front of the engine. Those signs can have other causes, so look over the belt and its pulleys with the engine off before replacing it. Replacing the tensioner is recommended when the truck has one. Each truck takes one belt for the fan and alternator drive.
This serpentine belt for the fan and alternator drive is a direct-fit replacement for the 2010 International/Navistar Workstar 7600 truck and the 2008-2009 International 7400 L6-9.3L, as well as the truck named above.
Fit and size
Build and materials
Interchange: 25-100983HD
983K10MK · 5100983 · 1100983 · 4100983 · 1847717C1 · 1847748C1 · 1888648C1 · 10PK2494 · 10PK2495 · 10PK2496 · 10PK2497 · 10PK2498 · 10PK2499 · 10PK2500 · 10734928
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Gates FleetRunner serpentine belt right for the 2010 International/Navistar Workstar 7600 truck?
Yes, Gates K100983HD fits the 2010 International/Navistar Workstar 7600 truck. If your truck is a different one, find it in the "Vehicles it fits" section to see which years and engines are covered.
Is this one of the Gates ribbed belts with 10 ribs?
Yes. This serpentine belt is a V-ribbed belt with 10 ribs, a K cross section and a top width of 35 mm (1.367 in).
What is this Gates micro v serpentine belt made of?
The belt is EPDM with a polyester cord and a green overcord. The EPDM construction is patented and built for heavy-duty drives.
What signs show that one of the Gates drive belts like this is worn out?
Cracked or glazed ribs, or a squealing noise at the front of the engine, can mean the belt is worn. Inspect it by eye with the engine off.
Does Gates K100983HD replace number 5100983?
Yes, 5100983 is on the interchange list for the Gates K100983HD serpentine belt, along with other cross-reference numbers shown at the bottom of this page.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.