GB Fuel Injector P/N:722-506
GB 722-508 fuel injector for the 2008-2010 Ford F-250 Super Duty V8 6.4L and other vehicles delivers diesel fuel into the engine's cylinder. This remanufactured GB fuel injector is completely torn down, ultrasonically cleaned and inspected before it is rebuilt.
Hard starting, a rough idle or misfires can mean an injector is worn or failing, though other fuel-system faults can look alike. With the engine off and cool, look for fuel weeping around the injectors and for damaged lines first; pressure and balance tests are best left to a shop. If a failed injector is the cause, this one replaces it.
It fits the 2008-2010 Ford F-250 Super Duty V8 6.4L, the 2008-2010 Ford F-350 Super Duty V8 6.4L and the 2008-2010 Ford F-450 Super Duty V8 6.4L. This listing is one injector, and the V8 6.4L in these trucks takes eight. If your vehicle is not among those three, find it in the "Vehicles it fits" section.
Fit and size
Build and materials
One remanufactured fuel injector with a new fuel line, o-rings and seals, a stainless-steel combustion seal and a technical bulletin.
Interchange: 8C3Z9E527A · 8C3Z9E527DRM · 1873422C93 · 1875072C91 · 4307369R91 · 4307381R91 · 5010359R93
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this Ford F-250 Super Duty fuel injector right for the 2008-2010 V8 6.4L?
Yes. GB 722-508 fits the 2008-2010 Ford F-250 Super Duty V8 6.4L, which takes eight injectors. If your vehicle is a different one, look it up in the "Vehicles it fits" section.
Will this Ford F-350 Super Duty fuel injector work on the 2008-2010 V8 6.4L?
Yes. GB 722-508 also fits the 2008-2010 Ford F-350 Super Duty V8 6.4L, and the engine takes eight injectors.
Are GB injectors flow-tested before use?
Yes. Each GB 722-508 is 100% tested to OE specifications on a flow bench under multiple operating parameters.
Does a new fuel line come with this remanufactured diesel injector?
Yes. The injector comes with a new fuel line, new o-rings and seals and a stainless-steel combustion seal, plus a technical bulletin for the job.
Is the nozzle replaced when this injector is remanufactured?
Yes. The nozzle is 100% replaced for accurate, precise injection under all operating parameters. The injector is also completely torn down, ultrasonically cleaned and inspected.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.