GMB Engine Water Pump P/N:120-4370
GMB 120-4050 water pump for the 2019-2026 Ram 2500 6-cylinder 6.7L and other vehicles moves coolant through the engine. This GMB engine water pump is built to OE-level tolerances and designed to match OE coolant flow rate and pressure.
A coolant leak at the pump, a squeal or grinding noise from the bearing, or an engine that runs hot can mean the water pump is worn. A loose serpentine belt, a sticking thermostat or a leaking hose can be behind these signs too, so find the cause before you buy.
The 2019-2026 Ram 2500 6-cylinder 6.7L, the 2019-2026 Ram 3500 6-cylinder 6.7L and the 2019-2026 Ram 4500 6-cylinder 6.7L are direct-fit for this pump, and it fits more vehicles too. If yours is not named here, look it up in the "Vehicles it fits" section.
Fit and size
Build and materials
One water pump with its pulley and one rubber gasket or seal. This listing holds one pump, and the vehicle takes one. The back housing, bolts, a bracket, a sensor, a thermostat and a fan clutch are not included, so plan on new bolts.
Interchange: 68445352AA · 68569196AA
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this water pump right for a 2019-2026 Ram 2500 6-cylinder 6.7L?
Yes. GMB 120-4050 is listed for the 2019-2026 Ram 2500 6-cylinder 6.7L, and the vehicle takes one pump. If yours is another model, look it up in the "Vehicles it fits" section.
Is this water pump a fit for the 2019-2026 Ram 3500 6-cylinder 6.7L?
Yes. The GMB 120-4050 is listed for the 2019-2026 Ram 3500 6-cylinder 6.7L, with one pump per vehicle.
Does this water pump come with a pulley and bolts?
It comes with the pulley and one rubber gasket or seal. Bolts, a bracket, a thermostat and a sensor are not included, so plan on new bolts.
Is the impeller on this GMB water pump plastic or metal?
The impeller is plastic, and the pump body is an aluminum casting. The pump is driven by the serpentine belt, and its impeller rotation is listed as reverse.
How can I tell if the bearing on a water pump is going bad?
Coolant seepage at the pump, a squeal or grinding noise while driving, or play in the pulley with the engine off and cool can mean the bearing or seal is wearing. A shop can confirm which part is at fault.
Published by the manufacturer of this part. Links open in a new tab.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.