GMB 130-7350 water pump for the 2004-2008 Chevrolet Malibu 4-cylinder 2.2L, the 2008-2014 Malibu 4-cylinder 2.4L and other vehicles circulates coolant through the engine to carry heat away. It is designed to match OE coolant flow rate and pressure and is built to OE-level tolerances.
A coolant leak at the pump, a whine or grinding from the bearing area, or an engine that runs hot can point to a worn water pump. These signs alone do not prove the pump is at fault, since a low coolant level or a failing thermostat can overheat an engine too. Each engine takes one pump.
This pump is listed for a wide range of Chevrolet, Buick, Pontiac, Saturn and other models, including the 2004-2008 Chevrolet Malibu 4-cylinder 2.2L and the 2008-2014 Malibu 4-cylinder 2.4L. It also works as a Chevy Equinox water pump for the 2010-2017 4-cylinder 2.4L. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
One water pump with its pulley and shaft, and two rubber gaskets or seals. The back housing, bolts, bracket, thermostat, sensor and fan clutch are not included; plan on new bolts, since the old ones may not be reusable.
Product information is for general reference and may contain errors. See our Disclaimer.
Is this the Chevy Malibu water pump for a 2004-2008 model with the 4-cylinder 2.2L?
Yes. GMB 130-7350 is listed for the 2004-2008 Chevrolet Malibu 4-cylinder 2.2L and the 2008-2014 Malibu 4-cylinder 2.4L. For other models, open the "Vehicles it fits" section.
Is this a Chevy Impala water pump for the 2014 model with the 4-cylinder 2.4L?
Yes. GMB 130-7350 is listed for the 2014 Chevrolet Impala 4-cylinder 2.4L, and that engine takes one pump.
What does this engine water pump come with?
It comes with the pulley, the shaft, two rubber gaskets or seals and an instruction sheet. Bolts, bracket, thermostat, sensor, fan clutch and back housing are not included.
Is the impeller on this water pump metal?
Yes. The impeller is metal and the body is an aluminum casting. The pump is chain driven and has standard impeller rotation.
How is this GMB water pump tested?
Every pump is 100% factory tested for leakage and dimensional precision. The bearing is also tested for noise and durability.
Published by the manufacturer of this part. Links open in a new tab.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.