GMB Engine Water Pump P/N:130-1840
GMB 170-1840 water pump for the 2000-2009 Toyota Tundra V8 4.7L and other vehicles circulates engine coolant while the engine runs. This GMB water pump, also called an engine water pump, is designed to match OE coolant flow rate and pressure.
A coolant leak at the pump, noise from its bearing or engine overheating can mean the water pump is wearing out. These signs alone do not prove the pump is at fault, because a thermostat that sticks can overheat the engine too.
Listed for a wide range of Toyota and Lexus models, it is a water pump replacement for the 2003-2009 Toyota 4Runner V8 4.7L and the 2001-2009 Toyota Sequoia V8 4.7L, and each takes one. If your car is not named here, open the "Vehicles it fits" section and look up your exact model and engine.
Fit and size
Build and materials
One water pump with its pulley, mounting hardware and instruction sheet. Bolts, bracket, sensor, thermostat, fan clutch and back housing are not included.
Product information is for general reference and may contain errors. See our Disclaimer.
Is the GMB 170-1840 one of the Toyota Tundra water pumps for the 2000-2009 Tundra V8 4.7L?
Yes. GMB 170-1840 is listed for the 2000-2009 Toyota Tundra V8 4.7L, and that truck takes one. Open the "Vehicles it fits" section to check another model and engine.
Does the GMB 170-1840 water pump come with the pulley and gaskets?
Yes. The GMB 170-1840 includes the pulley, mounting hardware, four gaskets or seals and an instruction sheet. Bolts, bracket, sensor, thermostat, fan clutch and back housing are not included.
What are the casting and impeller materials on this water pump?
The casting is aluminum and the impeller is plastic. Impeller rotation is reverse, and the gasket material is paper.
How can I tell if the bearing on this water pump is going bad?
Noise from the pump's bearing or a coolant leak around the pump can mean it is wearing out. Have a shop test the cooling system rather than driving on a suspect pump.
Is this water pump tested for leaks and bearing noise?
Yes. Each pump is 100% factory tested for leakage and dimensional precision, and bearing noise and durability are tested as well.
Published by the manufacturer of this part. Links open in a new tab.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.