GMB 260-0153 universal joint strap kit for the 2004-2011 Chevrolet Colorado and other vehicles holds the bearing cups of a driveshaft universal joint against its yoke.
- Meets or exceeds OEM specifications.
Vibration that rises with road speed, or a clunk when you shift between drive and reverse, can mean the universal joint's retention is worn. A worn slip yoke, a loose mount or an unbalanced driveshaft can also be behind those signs, so find the source before you buy.
It is listed for a wide range of models from Chevrolet, GMC and other makes, including the 2004-2010 GMC Canyon and the 2002-2009 Chevrolet Trailblazer, as a direct-fit replacement. Open the "Vehicles it fits" section and look up your exact model and engine.
Specifications
- Position: rear shaft, all joints; rear shaft, rear joint; rear shaft, front joint; front shaft, front joint
- Quantity per application: 1 on most vehicles, 2 on some
- Country of origin: Japan
Interchange: 10024 · 45U0503 · 107 · AE521HDBCK2 · 114168SK · 170174342 · 114468SK · 5012 · 663001 · 3882979 · 89029375 · 36010 · U9728 · 3200BCK2 · P36010 · G3153S · 35024X · 669329 · 9848461 · 9718 · K27018 · KT127 · UJ36010 · 20732 · 306520 · XF9728
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
10024, 45U0503, 107, AE521HDBCK2, 114168SK, 170174342, 114468SK, 5012, 663001, 2600153, 3882979, 89029375, 36010, U9728, 3200BCK2, P36010, G3153S, 35024X, 669329, 9848461, 9718, K27018, KT127, UJ36010, 20732, 306520, XF9728
Frequently Asked Questions
Does the GMB 260-0153 strap kit fit the 2004-2011 Chevrolet Colorado?
Yes. GMB 260-0153 is listed for the 2004-2011 Chevrolet Colorado and for the 2004-2010 GMC Canyon, with no engine restriction in the listing.
Is this universal joint strap kit for the front or rear driveshaft?
It is listed for the rear shaft, covering all joints, the rear joint and the front joint, and for the front shaft's front joint.
Where is the GMB 260-0153 strap kit made?
The country of origin for GMB 260-0153 is Japan.
Can a clunk or vibration from the driveshaft point to a worn strap kit?
Yes, vibration at speed or a clunk on shifting can come from a worn universal joint retention. A shop can test the driveshaft to find where the noise starts.
Does GMB 260-0153 cross to number 36010?
Yes. 36010 is one of the interchange numbers listed for GMB 260-0153, along with 5012 and 9718. The full list is at the bottom of the description.
