Dorman Bolt P/N:981-212D
Dorman 981-235D bolt is a hex-head fastener that clamps parts together in a threaded hole. It is a metric M6-1.0 x 35 mm bolt.
Rounded hex corners, rust on the threads or a joint that keeps working loose can mean the bolt is worn, though a stripped threaded hole or a bent bracket can sit behind a loose joint just as well.
This is universal hardware, sold by size and thread rather than by application. Match the thread size, pitch and length to the bolt you are replacing.
Fit and size
Build and materials
Four bolts.
Interchange: 5022
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What size is the Dorman 981-235D bolt, so I can match it to my old one?
Dorman 981-235D is an M6-1.0 x 35 mm bolt: 6 mm thread diameter, 1 mm pitch and 35 mm thread length. Match all three to the bolt you are replacing.
How many bolts come in the Dorman 981-235D pack?
Dorman 981-235D comes as a pack of four bolts.
Is this Dorman bolt heat hardened?
Yes. Dorman 981-235D is a Class 10.9 steel bolt that is heat hardened and has a yellow zinc finish.
How can I tell an M6 hex bolt has worn out?
With the engine off and cool, look for rounded hex corners, stripped or rusty threads, or a bolt that will not stay tight.
Is this yellow zinc bolt tested for corrosion?
Yes. The hardware goes through salt spray testing to check corrosion resistance, and this bolt carries a yellow zinc finish.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.