Dorman Bolt P/N:981-520D
Dorman 981-540D bolt is a Class 10.9 metric hex bolt that clamps parts together with an M10-1.5 coarse thread.
Rust, stripped threads or a rounded hex head can mean a bolt needs replacing. Signs like these alone do not prove the bolt is at fault, because a damaged tapped hole can also leave a joint loose.
This is universal hardware, sold by size rather than by application. Match the M10-1.5 thread, the 40 mm length and the head size to the bolt you are replacing.
Fit and size
Build and materials
Four bolts.
Interchange: 005440 · 05440 · 5440
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What thread and length do I match for the Dorman 981-540D bolt?
Match the M10-1.5 coarse thread and the 40 mm length to the bolt you are replacing. Dorman 981-540D is universal hardware, so it is chosen by size, not by application.
How many bolts come in the 981-540D pack?
The pack holds four steel hex bolts, each M10-1.50 X 40 mm.
Is this Dorman bolt heat hardened?
Yes. Dorman 981-540D is a Class 10.9 steel bolt, and it is heat hardened.
Are these M10 hex bolts tested for corrosion?
Yes. The hardware goes through salt spray testing to confirm corrosion resistance, and the bolts have a yellow zinc finish.
What wrench size fits an M10-1.5 x 40 mm hex bolt like this one?
The head tool size listed for this hex bolt is 0.66 in. Use a wrench or socket of that size on the hex head.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.