Delphi Diesel High Pressure Oil Pump P/N:EXHTP108
MELLING 10295 oil pump for the 1999-2013 Chevrolet Silverado 1500 V8 4.8L or 5.3L, the 2003-2006 Silverado 1500 V8 6.0L and other vehicles pumps oil through the engine under pressure. This rotary engine oil pump is driven by the crankshaft, and each one is tested individually for pressure and flow.
A worn pump can show up as low oil pressure, a pressure warning light or engine noise. Before you replace it, rule out low oil level, a faulty oil pressure sensor and a plugged pickup screen, since they can give similar symptoms.
It is listed for a wide range of Chevrolet, GMC and Cadillac models, including the 1999-2013 GMC Sierra 1500 V8 4.8L or 5.3L, the 2001-2006 Sierra 1500 V8 6.0L, the 2000-2009 Chevrolet Tahoe V8 4.8L and the 2000-2014 Tahoe V8 5.3L. Each engine takes one pump. If your vehicle is not named here, find its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One oil pump with its cover, gasket, o-rings for the screen assembly and alternate pressure springs. The pickup screen, bolts, washers and other hardware are not included, so plan on new bolts.
Product information is for general reference and may contain errors. See our Disclaimer.
Is this MELLING oil pump for 5.3 engines right for the 1999-2013 Chevrolet Silverado 1500 V8 5.3L?
Yes. MELLING 10295 is listed for the 1999-2013 Chevrolet Silverado 1500 V8 5.3L and takes one pump per engine. For another truck or SUV, find its year and engine in the "Vehicles it fits" section.
Is the MELLING high volume oil pump the same as this 10295?
No. MELLING 10295 is a standard volume pump with 0% added volume over stock. What it adds is pressure: 10 PSI more than the M295 it upgrades.
Which pressure springs come with the MELLING 10295?
The pump is set to 70 PSI (Red). It also comes with alternate springs: an optional lower 60 PSI (Blue) stock-pressure spring and an optional +25 psi spring (85 PSI) for COPO engines.
Does the MELLING ls oil pump come with a pickup screen?
No. The 10295 includes the cover, gasket, o-rings for the screen assembly and alternate springs, but no screen, bolts or hardware. It takes a 7/8 in. diameter bolt-on screen.
What are the housing and cover of this oil pump made of?
The 10295 housing is cast aluminum, CNC machined and hardcoat anodized. Its cover is cast iron, CNC machined and phosphate coated, and the rotor is steel.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.