Delphi Ignition Knock (Detonation) Sensor P/N:AS10200
Delphi AS10094 ignition knock (detonation) sensor for the 2013-2016 Ford Escape 4-cylinder 1.6L, the 2017-2019 Escape 4-cylinder 1.5L and other vehicles picks up engine knock and sends a signal to the engine computer. Delphi tests and calibrates its sensors to OE standards for accurate readings.
A failing knock sensor can show up as a check engine light or pinging under load. Before you replace this sensor, rule out a damaged harness, a loose connector or poor fuel, and let a shop test the circuit if the cause is unclear.
This direct-fit knock sensor also fits the 2013-2014 Ford Fusion 4-cylinder 1.6L, the 2014-2020 Fusion 4-cylinder 1.5L and the 2011-2019 Ford Fiesta 4-cylinder 1.6L. If your car is not named here, look up its year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One ignition knock (detonation) sensor. The quantity a car takes varies by vehicle; the cars named above take two each.
Interchange: 158-1219 · 158-1239 · BE8Z 12A699-B · XS8Z 12A699-AA · 144-221 · AJ03-18-921A
2131811 · 2132266 · 5S2257 · S8656 · S8910 · DKS313 · DKS750 · DKS839 · JDE1296 · LRA1692DB · SE51310 · KS165 · KS310 · KS399 · SU2218
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is the Delphi AS10094 knock sensor right for the 2013-2016 Ford Escape 4-cylinder 1.6L?
Yes. Delphi AS10094 fits the 2013-2016 Ford Escape 4-cylinder 1.6L and the 2017-2019 Escape 4-cylinder 1.5L, and both take two sensors.
Does the Delphi AS10094 fit the 2011-2019 Ford Fiesta 4-cylinder 1.6L?
Yes. Delphi AS10094 is listed for the 2011-2019 Ford Fiesta 4-cylinder 1.6L, which takes two sensors.
Does this knock sensor need power to work?
No. Its self-generating piezoelectric design requires no power to the sensor.
How is this Delphi knock sensor protected from water and electrical noise?
The sensor is sealed to withstand humidity, salt spray and automotive fluids. Its ground isolated 2-wire shielded harness helps protect the signal from electromagnetic interference (EMI).
Is 158-1219 the same as this ignition knock sensor?
Yes. 158-1219 is one of the numbers this sensor replaces, along with 158-1239 and DKS313. The full list is on the Interchange line.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.