INA US Engine Timing Chain Kit P/N:ZC-76351
INA US ZC-76351S timing chain kit for the 2012-2015 Ford Explorer 4-cylinder 2.0L, the 2016-2019 Explorer 4-cylinder 2.3L and other vehicles links the crankshaft to the camshafts so valve timing follows the pistons.
A rattle at startup or rough running can mean the chain has stretched or worn. Before you replace the kit, rule out a loose accessory, a failing sensor or an oil-pressure problem that can produce similar symptoms. The engine takes one kit.
Vehicles it fits include the 2013-2019 Ford Escape 4-cylinder 2.0L and the 2015-2019 Ford Mustang 4-cylinder 2.3L, and it works as a timing chain for the 2016-2019 Ford Explorer 4-cylinder 2.3L too. If your own vehicle is not named here, look up its year and engine in the "Vehicles it fits" section before you order.
Fit and size
Build and materials
Two timing chains, a tensioner and chain guides. The camshaft sprocket, crankshaft sprocket, drive sprocket and gaskets are not included.
Interchange: 9-0744SAX · CJ5Z 6268 A · CJ5Z-6K254-A · CJ5Z-6K254-B · CJ5Z-6K255-A · CJ5Z-6K297-A · CM5Z-6A895-A
5591668100 · 76351S
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this the timing chain replacement for the 2012-2015 Ford Explorer 4-cylinder 2.0L?
Yes. INA US ZC-76351S fits the 2012-2015 Ford Explorer 4-cylinder 2.0L and the 2016-2019 Explorer 4-cylinder 2.3L. For any other vehicle, check the "Vehicles it fits" section.
Will this work as a Ford Mustang timing chain kit on the 2015-2019 model with the 4-cylinder 2.3L?
Yes. INA US ZC-76351S fits the 2015-2019 Ford Mustang 4-cylinder 2.3L, and the engine takes one kit.
Does this engine timing chain kit include the sprockets and gaskets?
No. The kit has two timing chains, a tensioner and chain guides. The camshaft, crankshaft and drive sprockets and the gaskets are not included.
Is the INA CDC timing chain kit made for the oil pump drive?
Yes. It is an oil pump drive kit made for the oil pump drive system, with tolerances set to minimize parasitic drag and wear.
Does ZC-76351S replace number CJ5Z-6K254-A?
Yes. CJ5Z-6K254-A is listed as an interchange number for INA US ZC-76351S.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.