KYB Suspension Control Arm Bushing P/N:SM5208
Help quiet a clunking, wandering front end with the KYB Control Arm Bushing SM5743, a direct-fit control arm bushing for the 2011-2016 Ram 1500 and the 2006-2010 Dodge Ram 1500 that mounts on the front lower control arm at the strut fork. This suspension control arm bushing cushions the strut-to-arm connection, letting the lower arm pivot on a controlled path while isolating road impacts, noise, and vibration from the rest of the vehicle.
Over time the rubber can crack, split, or harden, allowing extra movement at the strut-to-arm joint. If a worn bushing is the cause, signs may include clunking or knocking over bumps and during turns, along with vague or imprecise steering; diagnose the cause before replacing. Fits the 2006-2010 Dodge Ram 1500 and the 2011-2016 Ram 1500 — see the "Vehicles it fits" section to confirm your engine.
Interchange: 4877198AA · 4877198AB · 4877199AA · 4877199AB · 55398376AA · 55398376AB · 55398377AA · 55398377AB · 6102252AA · 6502396 · 6502530 · 6503284 · 6503457 · 6504707 · 6506321AA · 6508351AA · 6509549AA · 6509751AA
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
What does the KYB SM5743 control arm bushing do?
It cushions the front lower control arm where it meets the strut fork, letting the arm pivot on a controlled path while isolating road vibration, noise, and impacts from the rest of the vehicle.
Is this the right control arm bushing for a 2006-2010 Dodge Ram 1500?
It's a direct-fit replacement for the 2006-2010 Dodge Ram 1500 and the 2011-2016 Ram 1500. Check the "Vehicles it fits" section to confirm the exact fit and engine for your truck.
Where is this bushing located on the vehicle?
At the front lower control arm, at the point where it connects to the strut fork.
What are the signs this bushing may need replacing?
Cracked, split, or hardened rubber, clunking or knocking from the front over bumps and during turns, and vague steering can be signs. Diagnose the cause before replacing.
Should I replace both sides at the same time?
Bushings on both sides typically wear at a similar rate, so if one is worn it's good practice to inspect and, if needed, replace the matching bushing on the other side for balanced handling.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.