Rear Shock Absorber for 1996-2002 Toyota 4Runner - KYB 565002

KYB 565002 rear shock absorber for the 1996-2002 Toyota 4Runner is a high pressure monotube gas shock that damps rear suspension movement. The large-bore MonoMax design is made for trucks that tow, haul heavy loads or go off-road.

• KYB MonoMax large-bore monotube design for heavier or high center of gravity vehicles
• Monotube design that adjusts automatically to driving conditions with fade-free performance
• Zinc-coated piston ring that gives a positive seal
• Rubber boot keeps dirt and debris away from the shaft and seals
• Engineered to work with vehicles that have electronic safety systems such as ESC and ABS

Quick facts

• Part: KYB 565002 shock absorber
• Also called: high pressure monotube gas shock
• Fits: 1996-2002 Toyota 4Runner
• Position: Rear
• Condition: New

Oil film on the shock body, bouncing after bumps or a floaty rear end can mean a rear shock is worn. Worn bushings or springs can feel much the same, so rule them out first. With the engine off, look at the body for oil wetness and at the boot for tears; a shop can test the rest.

Fits

This shock absorber for the 1996-2002 Toyota 4Runner is sold one per listing, and the truck takes two. Both rear shocks are normally changed as a pair.

Specifications

In the box

One rear shock absorber with an off-road dust boot.

Interchange: 77726 · 4853180527