Keep body motion in check and your front wheels planted with the KYB Suspension Shock Absorber KG4523. Cataloged as a front-position shock absorber, it installs as a direct-fit replacement for a long run of classic Mercedes-Benz models — including the 1960-1965 220B, 220SB and 220SE, the 1963-1966 230SL, the 1966-1968 250S, and the 1968-1972 280SE and 280SEL. See the Buyer's Guide tab for the full list of covered applications.
Front axle: designed for the front suspension position on the listed applications.
Ride and motion control: dampens spring oscillation to help keep the tire in contact with the road for improved stability, control, and reduced tire wear.
Direct-fit replacement: for the listed vehicles, no modification called out.
A shock absorber converts the up-and-down energy of the suspension springs into heat, controlling compression and rebound so the ride stays settled. Signs a front shock may need replacing include excessive bouncing after bumps, front-end dive under braking, a fluid film on the shock body, or uneven tire wear. If worn front shocks are the cause of a loose, bouncy ride, this replaces them. Replacing both front shocks together as a matched pair is recommended for balanced ride control.
Interchange: 82612 · Manufacturer part number KG4523
This part cross-references / interchanges with the following part numbers:
82612
Frequently Asked Questions
Where does the KG4523 shock absorber mount?
It is cataloged as a front-position suspension shock absorber, so it installs on the front axle of the listed Mercedes-Benz applications.
Which vehicles does this shock fit?
It is a direct-fit replacement for numerous classic Mercedes-Benz models from 1960-1972, including the 220B, 230SL, 250S, and 280SE. Check the Buyer's Guide tab for the complete list.
What part number does the KG4523 replace?
It carries interchange number 82612. The part's own manufacturer part number is KG4523.
How do I know if my front shocks need replacing?
Signs a front shock may be worn include excessive bouncing after bumps, front-end dive under braking, fluid leaking from the shock body, or uneven tire wear. Diagnose the cause before replacing.
Should I replace shocks in pairs?
Replacing both front shocks together as a matched pair is recommended for balanced, even ride control across the axle.
Self Leveling ShockKYB self-leveling shocks are designed to help restore the vehicles original ride height as well as its handling and control capabilities.KYB recommended Original Equipment...
High Pressure Monotube Gas Shock for Cars and TrucksThe KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly,...
WARNING:
These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
