KYB Suspension Strut and Coil Spring Assembly P/N:SR4725
KYB SR4667 front right strut assembly for the 2011-2015 Jeep Grand Cherokee V6 3.6L or V8 5.7L and the 2014-2015 Grand Cherokee V6 3.0L supports vehicle weight, sets ride height and acts as the steering pivot for that corner. This KYB strut assembly, also called a complete strut and coil spring assembly, joins the strut, mount and spring in one unit.
A bouncy ride, a clunk over bumps or uneven tire wear can mean the strut assembly is worn, though a sway bar end link or a worn ball joint can be behind the same signs, so rule those out first. Struts are normally replaced as a left and right pair, so plan on the front left too; this listing is one strut for the front right.
This strut assembly is a direct-fit replacement for the 2011-2015 Jeep Grand Cherokee V6 3.6L or V8 5.7L and the 2014-2015 Grand Cherokee V6 3.0L.
Fit and size
Build and materials
One strut assembly with the mount and coil spring already assembled. The front right takes one, and the front left is a separate part.
Product information is for general reference and may contain errors. See our Disclaimer.
Is this KYB front strut assembly right for the 2011-2015 Jeep Grand Cherokee V6 3.6L or V8 5.7L?
Yes. KYB SR4667 is the front right strut assembly for the 2011-2015 Jeep Grand Cherokee V6 3.6L or V8 5.7L and the 2014-2015 Grand Cherokee V6 3.0L. The front left is a separate part.
Are KYB loaded struts like this one supplied with the spring and mount?
Yes. KYB SR4667 arrives as a complete corner unit with the strut, mount and coil spring pre-assembled. This listing is one front right assembly.
What is the coil spring made of on the KYB complete strut assembly?
The spring is high carbon steel, built for this application with the vehicle's corner weights in mind to help restore ride height. KYB designed it to match the strut.
What signs show KYB complete struts are wearing out?
With the car parked, an oily film on the strut body, a corner sitting lower than the other side or a cracked coil spring can point to a worn unit. A shop can test the rest.
Is the KYB SR4667 engineered for vehicles with ESC and ABS?
Yes. KYB SR4667 is designed to help cars with electronic safety systems such as ESC and ABS. Its strut is a KYB Excel-G with application-specific damping valves.
No reviews yet — be the first to review this product.
Write a ReviewWARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.