KYB Suspension Strut P/N:3330075
KYB 339080 front right suspension strut assembly for the 2007-2013 Mitsubishi Outlander supports the front right corner and damps wheel and body movement. This KYB strut assembly is calibrated to restore the original designed performance, not change it.
Oil on the strut body, a bouncy ride or a front end that dips under braking can mean the strut is worn. Before you replace it, rule out tire wear, low tire pressure and other worn suspension parts, which can cause similar changes in ride and handling.
It fits the 2007-2013 Mitsubishi Outlander, one strut for the front right. This listing is a single strut; the front left on that axle is a separate part, and the two are normally replaced at the same time.
Fit and size
Build and materials
Interchange: 4060A174 · 72437
This part cross-references / interchanges with the following part numbers:
Is the KYB front strut assembly 339080 right for the 2007-2013 Mitsubishi Outlander?
Yes. KYB 339080 is the front right strut assembly for the 2007-2013 Mitsubishi Outlander. The front left side is a separate part.
Is this KYB Excel-G strut assembly gas-charged or oil-filled?
The KYB 339080 is a nitrogen gas-charged, twin-tube design. Its triple lip fluid seal is intended to reduce the chance of oil and gas leaking out.
How can I tell if a front right KYB suspension strut is leaking or worn?
With the engine off, look for oil on the strut body. A bouncy ride or a front end that dips under braking can also mean wear, and a shop can test the strut.
Does this KYB suspension strut assembly replace the 4060A174?
Yes. KYB 339080 is listed as a replacement for the 4060A174 number.
Is the KYB 339080 strut made in the USA?
Yes. This Excel-G front right strut is made in the United States.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.