QuickSteer Suspension Stabilizer Bar Link Kit,Suspension Stabilizer Bar Link P/N:K80894
MOOG K90341 front left sway bar link for the 1998-2002 Honda Accord and other vehicles connects the sway bar to the suspension. The bar helps limit body roll in turns, and this link carries that load between the bar and the suspension.
A worn stabilizer bar link can show up as a knock or rattle over bumps, or as a looser feel in turns. Before you replace it, rule out other suspension parts that can knock in a similar way, such as bushings and mounts, so you are fixing the right fault.
This link fits the 1998-2002 Honda Accord, the 2001-2003 Acura CL and the 1999-2003 Acura TL. The listing is one link for the front left, which takes one; the front right is its own part, and the two sides are normally replaced together.
Fit and size
Build and materials
Will the MOOG K90341 work on the front left of a 1998-2002 Honda Accord?
Yes. MOOG K90341 is the front left link for the 1998-2002 Honda Accord, and the car takes one on that side.
Does this MOOG sway bar link have a greaseable socket?
Yes. The MOOG K90341 has a greaseable socket, so new lubricant can flush contaminants out, which reduces corrosion and wear.
What is the bolt length of this MOOG suspension stabilizer bar link?
The MOOG K90341 has a bolt length of 72 mm (2.834 in).
How can I tell if a MOOG stabilizer link is worn out?
A worn link can knock or rattle over bumps, and the car can feel looser in turns. A clunk when you turn the wheel at low speed can also be a sign.
Are MOOG sway bar end links like the K90341 sold in pairs?
No. This listing is one front left link; the front right is a separate part, and each side takes one.
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.