LuK Clutch Master Cylinder P/N:LMC574
LuK LMC649 clutch master cylinder for the 2001-2006 Chevrolet Silverado 2500 HD V8 6.6L or 8.1L and other vehicles turns clutch pedal movement into hydraulic pressure for the release system.
A worn or leaking clutch master cylinder can show up as a soft or sinking pedal or trouble getting into gear. The slave cylinder or a hydraulic line can give a similar pedal feel, so with the engine off, look for wet fluid around the cylinder before replacing it. The 2001-2006 Chevrolet Silverado 2500 HD V8 6.6L or 8.1L takes one master cylinder.
The 2001-2006 Chevrolet Silverado 2500 HD V8 6.6L or 8.1L, the 2001-2006 Chevrolet Silverado 3500 V8 6.6L or 8.1L and the 2001-2006 GMC Sierra 2500 HD V8 6.6L or 8.1L take this clutch master cylinder, along with other vehicles. It is an original equipment replacement built to OE specifications for fit, form and function. If your truck is not named here, look for it in the "Vehicles it fits" section.
One clutch master cylinder with its push rod. The clutch slave cylinder and the heat shield are not included, and an old heat shield may not be reusable, so plan on a new one.
Interchange: M0447 · 12572216 · 5110575100
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the LuK LMC649 fit a 2001-2006 Chevrolet Silverado 2500 HD with the 8.1L engine?
Yes. LuK LMC649 fits the 2001-2006 Chevrolet Silverado 2500 HD V8 6.6L or 8.1L, so either engine works. For other trucks, look in the "Vehicles it fits" section.
Does the LuK LMC649 come with a push rod?
Yes. The push rod is included with the LuK LMC649, along with installation instructions. The clutch slave cylinder and the heat shield are not included.
Does this clutch master cylinder come filled with fluid?
No. This clutch master cylinder is not pre-filled with fluid, and the system is not pre-bled.
What does the travel sensor on a LuK clutch master cylinder do?
Where needed, the integrated travel sensor senses the position of the clutch pedal. Start-stop systems and functions such as hill-start and speed control use that signal.
What is the peak torque limiter in a LuK clutch master cylinder for?
Where required, the limiter reduces the volume flow in the hydraulic system during sport driving. That helps prevent overloading the powertrain from sudden starts, like slipping off the clutch pedal.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.