LuK Clutch Master Cylinder P/N:LMC359
LuK LMC725 clutch master cylinder for the 2014-2018 Subaru Forester H4 2.5L and other vehicles turns clutch pedal force into hydraulic pressure that releases the clutch. It is one part of the hydraulic release system between the pedal and the clutch.
A soft or sinking clutch pedal, trouble getting into gear or fluid around the master cylinder can mean it is wearing out, but the slave cylinder, a line or air in the system gives a similar pedal feel. If the master cylinder is the cause, this unit replaces it. Before ordering, look with the engine off for fluid wetness around the master cylinder; a shop can check the slave cylinder and lines.
The 2014-2018 Subaru Forester H4 2.5L, the 2012-2016 Subaru Impreza H4 2.0L and the 2016-2017 Subaru Crosstrek H4 2.0L each take one, and this clutch master cylinder is a direct-fit replacement for these vehicles and more Subaru models.
One clutch master cylinder with its push rod. The clutch slave cylinder and heat shield are not included.
Interchange: 37230-FJ021
5110819100
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this clutch master cylinder right for a 2014-2018 Subaru Forester H4 2.5L?
Yes. LuK LMC725 is listed for the 2014-2018 Subaru Forester H4 2.5L, which takes one. If your car is not named on this page, look up its year and engine in the "Vehicles it fits" section.
Is the LuK LMC725 the clutch master cylinder for a 2012-2016 Subaru Impreza H4 2.0L?
Yes. The 2012-2016 Subaru Impreza H4 2.0L is listed for LuK LMC725, and it takes one.
Does the LuK LMC725 come with the push rod and fluid?
It includes the push rod and installation instructions. It is not pre-filled with fluid or pre-bled, and the clutch slave cylinder and heat shield are not included.
What does the travel sensor on a LuK clutch master cylinder do?
It reports where the clutch pedal is. Start-stop, electric parking brake, hill-start and speed control functions use that signal, and the sensor is built in only where an application needs it.
Is 37230-FJ021 an interchange number for the LuK LMC725?
Yes. 37230-FJ021 is listed as an interchange number for this master cylinder, as is 5110819100.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.