LuK Clutch Slave Cylinder P/N:LSC554
LuK LSC516 clutch slave cylinder for the 2005-2006 Volkswagen Jetta 4-cylinder 1.9L, the 2005-2014 Jetta 5-cylinder 2.5L, the 2011-2015 Jetta 4-cylinder 2.0L, the 2014-2017 Jetta 4-cylinder 1.8L, the 2016-2018 Jetta 4-cylinder 1.4L and other vehicles turns hydraulic pressure from the pedal circuit into release movement at the clutch. It is one link between the pedal and the clutch, so it affects how easily the clutch operates.
A leaking or failing slave cylinder can show up as a soft or sinking clutch pedal, trouble getting into gear or fluid near the clutch housing. A leak elsewhere in the hydraulic circuit can feel the same, so with the engine off, check whether the clutch fluid level has dropped, and leave tracing the leak to a shop. If this cylinder is the cause, this one replaces it.
A wide range of Volkswagen models take this slave cylinder, including the 2012-2014 Volkswagen Passat 5-cylinder 2.5L and the 2015 Passat 4-cylinder 1.8L. It is also a clutch slave cylinder for the 2010-2011 VW Golf 5-cylinder 2.5L, and it meets or exceeds OE specifications. If your car is not named here, enter it in the "Vehicles it fits" section to see whether this one is matched to it.
One clutch slave cylinder. This listing holds one, and the vehicle takes one.
Interchange: KN19031.4.1 · 1K0 721 261 AB
S1708 · S1709 · 5120010770
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this a VW Jetta slave cylinder for the 2011-2015 Jetta 4-cylinder 2.0L?
Yes. LuK LSC516 fits the 2011-2015 Volkswagen Jetta 4-cylinder 2.0L, and that Jetta takes one slave cylinder.
Does this VW Passat clutch slave cylinder fit the 2012-2014 Passat 5-cylinder 2.5L?
Yes. LuK LSC516 fits the 2012-2014 Volkswagen Passat 5-cylinder 2.5L, and also the 2015 Passat 4-cylinder 1.8L.
What does the integrated travel sensor on a LuK slave cylinder do?
It reads clutch pedal position, which start-stop, electric parking brake, hill-start and speed control use. LuK builds the sensor in where a vehicle needs one.
How do I tell if a leaking slave cylinder is behind my soft clutch pedal?
Wet fluid at the cylinder, a soft or sinking pedal or trouble getting into gear can mean the slave cylinder is leaking. A shop can pressure-test the hydraulic circuit to confirm.
Does LuK LSC516 replace OE number 1K0 721 261 AB?
Yes. 1K0 721 261 AB is one of the numbers this LuK LSC516 clutch slave cylinder replaces; the full cross-reference is on the Interchange line.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.