LuK Transmission Clutch Kit P/N:03-046
LuK 01-046 transmission clutch kit for the 2007-2011 Jeep Wrangler V6 3.8L and other vehicles links the engine to the transmission and disengages it when you press the pedal.
Slipping under load, a clutch that drags or is hard to shift, or a pedal that feels different can mean the clutch is worn. A flywheel or a slave cylinder can be behind the same symptoms, so find the cause before you replace the clutch.
This kit fits the 2007-2011 Jeep Wrangler V6 3.8L and the 2002-2004 Jeep Liberty V6 3.7L, and each of them takes a single kit.
Fit and size
Build and materials
Cover assembly, clutch disc, release bearing, all necessary pilots and an accessory pack.
Interchange: K70608-01
6263088000
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the LuK 01-046 clutch kit fit a 2007-2011 Jeep Wrangler V6 3.8L?
Yes. LuK 01-046 is listed for the 2007-2011 Jeep Wrangler V6 3.8L, and that vehicle takes one kit.
Is the LuK 01-046 the right clutch kit for a 2002-2004 Jeep Liberty V6 3.7L?
Yes. LuK 01-046 is also listed for the 2002-2004 Jeep Liberty V6 3.7L, and one kit is needed per vehicle.
Does this LuK clutch kit come with a release bearing?
Yes. The kit contains a cover assembly, clutch disc, release bearing, all necessary pilots and an accessory pack.
What size is the clutch disc in this kit, and how many splines does it have?
The clutch disc is 257 mm in diameter with 10 splines. The pressure plate is a diaphragm spring type.
Does LuK 01-046 cross-reference to K70608-01?
Yes. K70608-01 is listed as an interchange number for LuK 01-046, along with 6263088000.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.