LuK 06-040 transmission clutch kit for the 1986-1999 Nissan Sentra 4-cylinder 1.6L and other vehicles replaces the cover assembly, clutch disc and release bearing in one set.
- LuK RepSet clutch kit
- Release bearing included with the cover assembly and clutch disc
- Light, comfortable pedal that stays consistent over the clutch's life
- Diaphragm spring pressure plate
Quick facts
- Part: LuK 06-040 transmission clutch kit
- Fits: 1986-1999 Nissan Sentra 4-cylinder 1.6L and other vehicles
- Condition: New
A clutch that slips under load, drags with the pedal down, or makes noise when you press the pedal can mean it needs replacing. A pedal or linkage problem can feel similar, so with the engine off, press the pedal by hand and note any sticking or looseness before you order.
Fits
This kit is listed for a wide range of Nissan models. Besides the Sentra, it fits the 1995-2006 Nissan Tsuru 4-cylinder 1.6L and the 1995-2003 Nissan Tsubame 4-cylinder 1.6L. If your car is another model, look it up in the "Vehicles it fits" section. The 1986-1999 Nissan Sentra 4-cylinder 1.6L takes one kit.
Specifications
Fit and size
- Quantity per vehicle: 1
- Clutch disc diameter: 190.5 mm
- Clutch disc splines: 18
- Flywheel cup depth/step height: 7.5 mm
Build and materials
- Spring quantity: 4
- Condition: New
- Country of origin: Mexico
In the box
Cover assembly, clutch disc, release bearing, all necessary pilots and an accessory pack.
Interchange: 06-040SE · KF639-02
6190846770 · 51904001
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
06-040, 06-040SE, 6190846770, KF639-02, 51904001
Frequently Asked Questions
Is the LuK 06-040 clutch kit right for a 1986-1999 Nissan Sentra 4-cylinder 1.6L?
Yes. LuK 06-040 is listed for the 1986-1999 Nissan Sentra 4-cylinder 1.6L, and that car takes one kit.
Does the LuK 06-040 RepSet come with a release bearing?
Yes. LuK 06-040 includes a cover assembly, clutch disc, release bearing, all necessary pilots and an accessory pack.
What size clutch disc is in this LuK RepSet?
The clutch disc is 190.5 mm in diameter with 18 splines. The pressure plate is the diaphragm spring type.
What are signs a clutch may need a kit like this LuK RepSet?
Slipping under load, not releasing fully, or noise when you press the pedal can all mean the clutch or its release bearing is worn.
Is KF639-02 the same as the LuK 06-040 clutch kit?
KF639-02 is listed as an interchange number for LuK 06-040. The other listed numbers are 06-040SE, 6190846770 and 51904001.
