LuK Transmission Clutch Kit P/N:02-056
LuK 07-056 transmission clutch kit for the 1988-1994 Ford F-150 6-cylinder 4.9L and other vehicles engages and disengages the engine from the transmission as you work the pedal. It replaces a worn cover assembly and clutch disc.
A slipping clutch, a stiff or heavy pedal, chatter on engagement or trouble getting into gear can mean the clutch is worn. Before you replace the kit, switch the engine off and look the pedal and its linkage over for play, rust or fluid, because parts outside this kit can produce similar symptoms.
The kit is listed for a wide range of Ford models, including the 1988-1994 Ford F-250 6-cylinder 4.9L and the 1988-1992 Ford Bronco 6-cylinder 4.9L, and each takes one. If your Ford is a different model, look up its year and engine in the "Vehicles it fits" section on this page.
Fit and size
Build and materials
Cover assembly, clutch disc, all necessary pilots and an accessory pack. The release bearing is not included.
Interchange: 07-056NB · 07-098 · K0030-03
6253025770 · 52542004 · 52542005
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Is this LuK 07-056 clutch kit right for a 1988-1994 Ford F-150 6-cylinder 4.9L?
Yes, LuK 07-056 is listed for the 1988-1994 Ford F-150 6-cylinder 4.9L, and one kit is needed. For other Ford models, look them up in the "Vehicles it fits" section.
Does the LuK 07-056 clutch kit come with a release bearing?
No. The kit holds the cover assembly, clutch disc, all necessary pilots and an accessory pack. The release bearing is not included.
What kind of pressure plate does this clutch kit have?
The cover assembly uses a diaphragm spring pressure plate with a spring quantity of 5. The clutch disc is 254 mm across and has 10 splines.
How can I tell if my clutch is slipping or worn?
A slipping clutch can show up as engine revs climbing without the vehicle speeding up, and a stiff pedal or shudder when engaging can also be signs of wear. A shop can test the clutch if you are unsure.
Can I use LuK 07-056 in place of a K0030-03 clutch kit?
Yes. K0030-03 is one of the numbers LuK 07-056 replaces, along with 07-098 and 52542004.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.