MAHLE Engine Cylinder Head Gasket Set P/N:HS54442
MAHLE HS54657 cylinder head gasket set for the 2008-2010 Ford F-250 Super Duty V8 6.4L and other vehicles seals the cylinder head to the engine block. This MAHLE cylinder head gasket is packed as a top-end set with the surrounding seals.
Overheating, coolant loss with no visible leak or milky oil can be signs of a failed head gasket, and other faults can produce them too. Before you replace the set, rule out a leaking hose, radiator or water pump. The V8 6.4L takes one set. Head bolts are not included, so plan on new ones, since the old bolts may not be reusable.
It also fits the 2008-2010 Ford F-350 Super Duty V8 6.4L and the 2008-2010 Ford F-450 Super Duty V8 6.4L. If your truck is not one of these, look it up in the Vehicles it fits section on this page.
Cylinder head gasket, intake manifold gasket, exhaust manifold gasket, EGR valve gasket, throttle body gasket, valve cover gasket and cylinder head dowel. Cylinder head bolts are not included.
Interchange: 8C3Z-6079-A · 8C3Z-6079-B · 8C3Z-6079-C · 8C3Z-6079-D
HS 26565 PT
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Will the MAHLE cylinder head gasket set fit the 2008-2010 Ford F-350 Super Duty V8 6.4L?
Yes, MAHLE HS54657 fits the 2008-2010 Ford F-350 Super Duty with the V8 6.4L. For other trucks, look in the Vehicles it fits section.
Does this engine cylinder head gasket set come with head bolts?
No, cylinder head bolts are not included and replacement bolts are recommended. MAHLE HS54657 does include the cylinder head dowel and the intake, exhaust, EGR valve, throttle body and valve cover gaskets.
Is this MAHLE head gasket multi-layered steel?
Yes, the cylinder head gasket in MAHLE HS54657 is multi-layered steel, as is the exhaust manifold gasket; the intake manifold gasket is molded rubber.
How can I check whether the head gasket on my truck is leaking?
With the engine off and cool, look for oil or coolant seeping at the joint between the head and block. Internal leaks do not show outside, so a shop can run a pressure or compression test.
Does MAHLE HS54657 replace 8C3Z-6079-A?
Yes, 8C3Z-6079-A is one of the interchange numbers MAHLE HS54657 replaces.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.