MAHLE MS19389 intake manifold gasket set for the 2001-2003 Ford F-150 V6 4.2L and other vehicles seals the joint where the intake manifold meets the engine.
Before you replace this set, rule out other vacuum leaks, such as a cracked or loose hose, because a rough idle or a lean-running condition can have several causes. If a worn engine intake manifold gasket set is the cause, this one replaces it. The V6 4.2L takes one set.
The 2001-2003 Ford F-150 V6 4.2L, the 2004 Ford F-150 Heritage V6 4.2L and the 2003 Ford E-150 V6 4.2L all take this set, and so do other vehicles.
Fit and size
Build and materials
Intake manifold gasket set with a plenum gasket and end seals.
Interchange: MS 98011 T-3
This part cross-references / interchanges with the following part numbers:
Is this the Ford F-150 intake manifold gasket for the 2001-2003 V6 4.2L?
Yes, MAHLE MS19389 fits the 2001-2003 Ford F-150 V6 4.2L; if your vehicle is not named on this page, look for it in the "Vehicles it fits" section.
Does the MAHLE MS19389 set include a plenum gasket?
Yes. MAHLE MS19389 comes with a molded rubber plenum gasket, and end seals are in the package as well.
What is the intake manifold gasket in this set made of?
The intake manifold gasket in this set is molded rubber. The plenum gasket that comes with it is molded rubber too.
How can I tell if my V6-4.2L intake manifold gasket is leaking?
With the engine off and cool, look for cracked, flattened or displaced rubber at the manifold joint. A rough idle can also point to an air leak, and a shop can test for one.
Does MS 98011 T-3 interchange with the MAHLE MS19389 set?
Yes. MS 98011 T-3 is listed as an interchange number for MAHLE MS19389.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
