Seal the valve cover joint and keep engine oil where it belongs with the MAHLE valve cover gasket VS50426S. This molded-rubber gasket seats between the right-bank cylinder head and its valve cover, and it drops in as a direct-fit replacement for the 2005-2007 Honda Odyssey and 2006-2008 Honda Pilot with the V6-3.5L engine. If a hardened, leaking original gasket is the source of oil seepage around the cover, oil on the plugs, or a burning-oil smell, this replaces it.
- Material: molded rubber that conforms to the cover rail for a tight seal.
- Thickness: 0.36 in (9.12 mm).
- Position: right-bank valve cover.
- Grade: OEM Standard.
- Note: PCV valve grommet not included; transfer or source separately as the service procedure directs.
Made in Japan. One gasket per application, as listed. For even sealing on a V6, it's good practice to inspect the opposite-bank gasket at the same time.
Interchange: VS 50607 R1 · 12351-RDV-J00
VS50607R1 · 12351RDVJ00
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Which vehicles does the MAHLE VS50426S valve cover gasket fit?
It's a direct-fit replacement for the 2005-2007 Honda Odyssey and 2006-2008 Honda Pilot with the V6-3.5L engine. Check the Buyer's Guide tab to confirm your vehicle.
Is this a Honda Odyssey valve cover gasket or a Honda Pilot valve cover gasket?
Both. This gasket fits the 2005-2007 Honda Odyssey and the 2006-2008 Honda Pilot, both with the V6-3.5L engine.
What is this valve cover gasket made of?
It's molded rubber, 0.36 in (9.12 mm) thick, listed at OEM Standard grade and made in Japan.
Which bank does this gasket cover?
It seals the right-bank valve cover. On a V6 the opposite bank uses its own gasket, so inspect both if you're chasing an oil leak.
Does it include a PCV valve grommet?
No. The PCV valve grommet is not included; transfer the original or source one separately as directed by the service procedure.
Write a Review