MAHLE SS45626 valve stem seal set for the 1988-2000 Honda Civic 4-cylinder 1.6L, the 1992-1995 Civic 4-cylinder 1.5L, the 2001-2005 Civic 4-cylinder 1.7L, the 2002-2011 Civic 4-cylinder 2.0L, the 2003-2011 Civic 4-cylinder 1.3L, the 2006-2015 Civic 4-cylinder 1.8L, the 2012-2015 Civic 4-cylinder 2.4L, the 2012-2024 Civic 4-cylinder 1.5L, the 2016-2025 Civic 4-cylinder 2.0L and other vehicles seals around the intake valve stems. The MAHLE valve stem seals in this set limit how much oil runs down each stem.
- Fluoroelastomer seal material
- Inside diameter of 4.5 mm (0.177 in) on the valve side
- Outside diameter of 0.5 in
- Thickness of 0.015 in
- Intake position valve stem seals
Quick facts
- Part: MAHLE SS45626 valve stem seal set
- Also called: engine valve stem seal set
- Fits: 1988-2000 Honda Civic 4-cylinder 1.6L, the 1992-1995 Civic 4-cylinder 1.5L, the 2001-2005 Civic 4-cylinder 1.7L, the 2002-2011 Civic 4-cylinder 2.0L, the 2003-2011 Civic 4-cylinder 1.3L, the 2006-2015 Civic 4-cylinder 1.8L, the 2012-2015 Civic 4-cylinder 2.4L, the 2012-2024 Civic 4-cylinder 1.5L, the 2016-2025 Civic 4-cylinder 2.0L and other vehicles
- Position: Intake
- Material: Fluoroelastomer
- Condition: New
Worn valve stem seals can show up as blue-gray smoke at startup, smoke after idling, or an oil level that drops between changes. Before you replace the seals, rule out other oil sources such as a leaking valve cover gasket or worn piston rings, which can also put oil in the exhaust or lower the dipstick reading.
Fits
This set is listed for a wide range of Honda, Acura and other models, with the 1998-2007 Honda Accord V6 3.0L and the 2002-2017 Honda CR-V 4-cylinder 2.4L among the most common. The fitment lists a quantity of one for the 4-cylinder engines and two for the V6 engines. If your car is not named here, look it up in the "Vehicles it fits" section of this page.
Specifications
Fit and size
- Position: intake
- Quantity per vehicle: 1 for 4-cylinder engines, 2 for V6 engines
- Inside diameter: 4.5 mm (0.177 in)
- Outside diameter: 0.5 in
- Thickness: 0.015 in
Build and materials
- Type: valve stem seal set
- Material: fluoroelastomer
- Condition: new
- Country of origin: United States
Interchange: 022-1569 · SS 70283-1 · SS 70283-2 · 12210-P45-G01 · 12210-PJ7-004 · 12210-PZ1-003 · 12210-PZ1-004 · 5-86202-096-0
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Frequently Asked Questions
Is this Civic valve stem seal right for the 2006-2015 Honda Civic 4-cylinder 1.8L?
Yes. MAHLE SS45626 is listed for the 2006-2015 Honda Civic 4-cylinder 1.8L, which takes a quantity of one. It is an intake-position valve stem seal set.
How many valve stem seals does the 1998-2007 Honda Accord V6 3.0L take?
The fitment lists a quantity of two for the 1998-2007 Honda Accord V6 3.0L. The 4-cylinder engines in the same listing are given a quantity of one.
What material is this engine valve stem seal set made from?
MAHLE SS45626 is made of fluoroelastomer. Each seal has a 4.5 mm (0.177 in) inside diameter, a 0.5 in outside diameter and a thickness of 0.015 in.
What are signs the intake valve stem seals on my engine are worn?
Worn valve stem seals can appear as blue-gray exhaust smoke at startup or after idling, and as an oil level that falls between changes.
Does MAHLE SS45626 replace part number 12210-PZ1-003?
Yes. 12210-PZ1-003 is one of the numbers MAHLE SS45626 replaces. The other cross-reference numbers are on the Interchange line.
Reviews
No reviews yet — be the first to review this product.
Write a ReviewWrite a Review