Standard Ignition Manifold Absolute Pressure Sensor P/N:AS102
Standard Motor Products
Standard Ignition AS457 manifold absolute pressure sensor for the 2008-2010 Mitsubishi Outlander V6 3.0L, the 2008-2019 Outlander 4-cylinder 2.4L and other vehicles measures the pressure inside the intake manifold. Lab testing to match OE specifications is meant to ensure proper integration with the vehicle's emissions system.
A failing MAP sensor can show up as a rough idle, poor fuel economy or a check engine light. These signs alone don't prove the sensor is the problem; a vacuum leak at the intake is one other common cause.
This sensor is engineered specifically for Mitsubishi vehicles and is listed for a wide range of their models, such as the 2011-2019 Mitsubishi Outlander Sport 4-cylinder 2.0L, the 2015-2019 Outlander Sport 4-cylinder 2.4L, the 2011-2019 Mitsubishi RVR 4-cylinder 2.0L and the 2015-2019 RVR 4-cylinder 2.4L. If your Mitsubishi isn't named here, find your year and engine in the "Vehicles it fits" section.
Fit and size
Build and materials
One manifold absolute pressure sensor with O-rings. This listing holds one sensor, and the vehicle takes one. The wiring harness, mounting bracket and hardware are not included, so plan on new fasteners rather than reusing old ones.
Product information is for general reference and may contain errors. See our Disclaimer.
Does the Standard Ignition AS457 fit the 2008-2019 Mitsubishi Outlander 4-cylinder 2.4L?
Yes. The Standard Ignition AS457 is listed for the 2008-2019 Mitsubishi Outlander 4-cylinder 2.4L and the 2008-2010 Outlander V6 3.0L; other years and engines are in the "Vehicles it fits" section.
Does the AS457 sensor come with O-rings?
Yes. This listing is one AS457 sensor with O-rings; the wiring harness, mounting bracket and hardware are not included.
What connector does this manifold absolute pressure sensor use?
It has one rectangular female plug-in connector with three male blade terminals, plus one vacuum port.
How can I tell if a manifold absolute pressure sensor is going bad?
A rough idle, poor fuel economy or a check engine light can go along with a faulty sensor. A shop can read the codes and test it.
Is the AS457 tested to OE specifications?
Yes. The Standard Ignition AS457 is lab tested to match OE specifications, so it integrates properly with the emissions system.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.