Hitachi Astemo Manifold Absolute Pressure Sensor P/N:PRS0005
Hitachi Astemo PRS0003 manifold absolute pressure sensor for the 2013-2016 Nissan Altima 4-cylinder 2.5L and other vehicles measures intake manifold pressure and passes the reading to the ECU. It meets OE performance and durability standards for this application.
If the manifold absolute pressure sensor is behind a rough idle, a check engine light or poor fuel economy, this one replaces it. With the engine off and cool, look over the connector and wiring for damage or corrosion first; a shop can test the signal itself. Each engine takes one sensor, and this listing is a single sensor.
The 2013-2016 Nissan Altima 4-cylinder 2.5L, the 2009-2017 Nissan 370Z V6 3.7L and the 2014-2017 Infiniti QX50 V6 3.7L are among the vehicles this sensor fits, with more beyond them.
Fit and size
Build and materials
One manifold absolute pressure sensor. Installation hardware and installation instructions are not included, and the old bolts may not be reusable, so plan on new ones.
Interchange: 22365-EY01A · 22365-EY01B
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the Hitachi Astemo PRS0003 fit the 2013-2016 Nissan Altima 4-cylinder 2.5L?
Yes, Hitachi Astemo PRS0003 is listed for the 2013-2016 Nissan Altima 4-cylinder 2.5L. If your car is a different one, look it up in the "Vehicles it fits" section on the product page.
How many terminals does this manifold absolute pressure sensor have?
It has three male blade terminals and mounts with two bolts, so compare the connector on your old sensor with those three blades.
Does Hitachi Astemo PRS0003 come with bolts or instructions?
No. Installation hardware and installation instructions are not included. This listing is one manifold absolute pressure sensor.
My engine runs rough and the check engine light is on; could the manifold absolute pressure sensor be involved?
It can be, since this sensor reports intake manifold pressure to the ECU, but those signs have other possible causes. A shop can read the codes and test the signal.
Does 22365-EY01A cross to the Hitachi Astemo PRS0003?
Yes, 22365-EY01A and 22365-EY01B are listed as numbers that Hitachi Astemo PRS0003 replaces.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.