Marmon Ride Control Suspension Strut Mount P/N:4713663
DEA MOUNTS 4713271 rear suspension strut mount-universal for the 2000-2013 Chevrolet Impala and other vehicles joins the top of the strut to the car body and absorbs road vibration. It helps locate the strut and limits the movement passed into the body.
A worn rear strut mount can show up as a clunk over bumps, cracked or separated rubber, or movement at the top of the strut. Before replacing it, look at the rubber with the car parked and the engine off, and check the strut itself for leaks, since a tired strut can make a similar noise. The car takes two, one on each side of the rear axle.
Besides the 2000-2013 Chevrolet Impala, the vehicles it fits include the 2005-2009 Buick LaCrosse and the 2014-2016 Chevrolet Impala Limited. Open the "Vehicles it fits" section to check your exact model and engine.
Fit and size
Build and materials
A strut mount with its bolt and nuts. The insulator, bearing, bushing, spacer, washer, snap ring, sleeve, bellows, bumper and spring seat are not included.
Interchange: NS 902968
142533 · 10257805 · 10257806 · 10257807 · 10257808 · 10288795 · 10288796 · 10363583 · 10363584 · 10398290 · 10398291 · 10410959 · 10410960 · 10410961 · 10410962 · 10422852 · 10422853 · 10445032 · 10445033 · SM5144 · 902968 · 902969 · K6567
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
Does the DEA MOUNTS 4713271 strut mount fit a 2000-2013 Chevrolet Impala?
Yes. DEA MOUNTS 4713271 is a rear strut mount for the 2000-2013 Chevrolet Impala, and the car takes two, one on each side of the rear axle.
Does this DEA MOUNTS strut mount come with the bolt and nuts?
Yes. DEA MOUNTS 4713271 includes the bolt and nuts. The insulator, bearing, bushing, spacer, washer, snap ring, sleeve, bellows, bumper and spring seat are not included.
What is this rear strut mount made of?
This rear strut mount is made of steel and rubber. It is not greaseable and does not come pre-greased.
Why does my rear end clunk over bumps, and could it be the strut mount?
Cracked or separated rubber and a clunk from the rear over bumps can mean a worn strut mount. A shop can test the rest of the rear suspension.
Is K6567 an interchange number for DEA MOUNTS 4713271?
Yes. K6567 is on the interchange list for DEA MOUNTS 4713271, along with SM5144, 902969 and other numbers printed at the bottom of the description.
No reviews yet — be the first to review this product.
Write a Review
WARNING: These products can expose you to chemicals including lead and phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.