Keep the grease in and road grit out of your constant-velocity joint with the Mevotech Duraflex CV Joint Boot, part number DX859. It fits many vehicles, among them the 2011-2014 Toyota Camry, 2011-2018 Toyota Highlander and 1996-2004 Toyota Tacoma, as a direct-fit replacement for the listed applications. See the "Vehicles it fits" section for the full list.
A CV joint boot is the flexible cover that seals the joint. It holds the joint's lubricant in place and keeps dirt and water out as the axle turns and the suspension moves. Depending on the application, DX859 is cataloged for the front outer (left or right), front inner or rear inner position.
- Neoprene boot: a premium neoprene boot seals the CV joint.
- Clamps and snap rings included: both come in the kit to make installation easier.
- Grease tube included: the kit also supplies a tube of grease for repacking the joint.
Signs this part may need replacing: a split or torn boot, grease flung around the inside of the wheel or onto nearby suspension parts, or a loose or missing clamp. A torn boot can let contaminants reach the joint. If the joint already clicks when turning, inspect it before fitting a new boot, because the joint may also need replacing.
Interchange: 103-2818 · 103-2987 · 103-2988 · 103-2989 · 86-2319 · 100 495 0008 · 100 495 0009
1032818 · 1032987 · 1032988 · 1032989 · 862319 · 1004950008 · 1004950009 · QBK859 · 6490B · CVB859
Product information is for general reference and may contain errors. See our Disclaimer.
This part cross-references / interchanges with the following part numbers:
103-2818, 103-2987, 103-2988, 103-2989, QBK859, 86-2319, 100 495 0008, 100 495 0009, 6490B, DX859, CVB859
Frequently Asked Questions
What does the Mevotech DX859 CV joint boot do?
It seals the CV joint. It holds the joint's grease in and keeps dirt and water out as the axle rotates and the suspension moves.
Is the DX859 a 1996-2004 Toyota Tacoma cv joint boot?
Yes. It is listed for the 1996-2004 Toyota Tacoma, and it also fits the 2011-2014 Toyota Camry and 2011-2018 Toyota Highlander. Check the "Vehicles it fits" section for your exact vehicle.
What comes in the box?
The kit includes the neoprene boot, clamps, snap rings and a tube of grease.
Which position is this CV boot for?
Depending on the application, it is cataloged for the front outer (left or right), front inner or rear inner position. The "Vehicles it fits" section shows the position for your vehicle.
What are signs a CV joint boot needs replacing?
Common signs are a torn or split boot, grease sprayed around the wheel area, or a loose clamp. If the joint clicks when turning, it may be damaged and need replacing as well.
